Biomimetic Honeycomb-like Ti 3 C 2 T x MXene/Bacterial Cellulose Aerogel-Based Flexible Pressure Sensor for the Human–Computer Interface
ACS Sensors · 24.01.2025 · 10 (1) · 417-426
DOI: 10.1021/acssensors.4c02716 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Sensors, online erschienen am 18.12.2024. Verfasst von Xinyu Hong und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Integrated Circuits and Electronics, Beijing Institute of Technology, Beijing 100081, P. R. China. Hauptthemen laut MEDLINE: Cellulose, Titanium, Biomimetic Materials. Die Arbeit wurde bisher 44-mal zitiert (Crossref) und nennt 52 Literaturangaben. Gefördert von: Natural Science Foundation of Beijing Municipality, National Natural Science Foundation of China.
Abstract (Originalsprache)
The pursuit of efficient and accurate human-computer interface design urgently requires high-performance sensors with pressure sensitivity, a wide detection range, and excellent cycling stability. Herein, a biomimetic honeycomb-like Ti3C2Tx MXene/bacterial cellulose (BC) aerogel with a negative Poisson's ratio (ν = -0.14) synthesized from the bidirectional freeze-drying method is used as the active material for a flexible pressure sensor, which exhibits high sensitivity (20.14 kPa-1), fast response time (100 ms), excellent mechanical durability (5000 cycles), and a low detection limit (responding to a grain of rice weighing about 0.022 g). Moreover, when assembled into the sandwich-structured bending sensor with the aerogel layer at just 0.8 mm in thickness, the aerogel-based device has a wide angular detection range (2.7-156.3°), high sensitivity (0.47 deg-1), and good robustness, proving outstanding electromechanical performance. Significantly, a smart glove consisting of five bending sensors fixed to the proximal knuckles and a flexible circuit board as the signal processing unit was designed for the identification of the shape, demonstrating its promising applications in the field of human-computer interaction.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- School of Integrated Circuits and Electronics, Beijing Institute of Technology, Beijing 100081, P. R. China.
- Faculty of Hepato-Pancreato-Biliary Surgery, Chinese PLA General Hospital, Institute of Hepatobiliary Surgery of Chinese PLA, Key Laboratory of Digital Hepatobiliary Surgery, Beijing 100853, P. R. China.
ORCID-Profile: La Li, Guozhen Shen
Förderung
- Natural Science Foundation of Beijing Municipality
- National Natural Science Foundation of China
Zitieren
APA
Hong, X., Du, Z., Li, Jiang, K., Chen, D., & Shen, G. (2025). Biomimetic Honeycomb-like Ti 3 C 2 T x MXene/Bacterial Cellulose Aerogel-Based Flexible Pressure Sensor for the Human–Computer Interface. ACS Sensors, 10(1), 417-426. https://doi.org/10.1021/acssensors.4c02716
Vancouver
Hong X, Du Z, Li, Jiang K, Chen D, Shen G. Biomimetic Honeycomb-like Ti 3 C 2 T x MXene/Bacterial Cellulose Aerogel-Based Flexible Pressure Sensor for the Human–Computer Interface. ACS Sensors. 2025;10(1):417-426. doi:10.1021/acssensors.4c02716
BibTeX
@article{Hong2025,
author = {Hong, Xinyu and Du, Zhijian and Li, La and Jiang, Kai and Chen, Di and Shen, Guozhen},
title = {Biomimetic Honeycomb-like Ti 3 C 2 T x MXene/Bacterial Cellulose Aerogel-Based Flexible Pressure Sensor for the Human–Computer Interface},
journal = {ACS Sensors},
year = {2025},
volume = {10},
number = {1},
pages = {417--426},
doi = {10.1021/acssensors.4c02716}
}
EUVIMED