EUVIMEDEUVIMED entdecken
Crossref

Ion-Electron Transduction Layer of the SnS 2 -MoS 2 Heterojunction to Elevate Superior Interface Stability for All-Solid Sodium-Ion Selective Electrode

Hai-Hua Dai, Xin Cai, Zi-Hao Liu, Rui-Ze Xia, Yong-Huan Zhao, Yang-Zhi Liu, Meng Yang, Pei-Hua Li, Xing-Jiu Huang iD

ACS Sensors · 2024

DOI: 10.1021/acssensors.3c02185 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Sensors, 2024. Verfasst von Hai-Hua Dai und 8 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Environmental Optics and Technology and Environmental Materials and Pollution Control Laboratory, Institute of Solid State Physics,…. Hauptthemen laut MEDLINE: Ion-Selective Electrodes, Molybdenum. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 50 Literaturangaben. Gefördert von: National Key Research and Development Program of China, Anhui Postdoctoral Science Foundation, National Postdoctoral Program for Innovative Talents.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The high selectivity and fast ion response of all-solid sodium ion selective electrodes were widely applied in human sweat analysis. However, the potential drift due to insufficient interfacial capacitance leads to the deterioration of its stability and ultimately affects the potential accuracy of ion analysis. Designing a novel ion-electron transduction layer between the electrode and the ion selective membrane is an effective method to stabilize the interfacial potential. Herein, the SnS2-MoS2 heterojunction material was constructed by doping Sn in MoS2 nanosheets and used as the ion electron transduction layers of an all-solid sodium ion selective electrode for the first time, achieving the stable and efficient detection of Na+ ions. The proposed electrode exhibited a Nernst slope of 57.86 mV/dec for the detection of Na+ ions with a detection limit of 10-5.7 M in the activity range of 10-6-10-1 M. Via the electronic interaction at the heterojunction interfaces between SnS2 and MoS2 materials, the micro-nanostructure of the SnS2-MoS2 heterojunction was changed and SnS2-MoS2 as the ion-electron transduction layer acquired excellent capacitance (699 μF) and hydrophobicity (132°), resulting in a long-term potential stability of 1.37 μV/h. It was further proved that the large capacitance and high hydrophobicity of the ion-electron transduction layer are primary reasons for the excellent stability of the all-solid sodium ion selective electrode toward Na+ ions.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Ion-Selective ElectrodesMolybdenumHumansElectronsElectric CapacitanceIons

Stichwörter der Autor:innen

SnS2-MoS2all-solid sodium ion selective electrodeheterojunction interfacehydrophobicitylarge capacitance

Substanzen

MolybdenumIons

Autor:innen und Institutionen

  • Key Laboratory of Environmental Optics and Technology and Environmental Materials and Pollution Control Laboratory, Institute of Solid State Physics, HFIPS, Chinese Academy of Sciences, Hefei 230031, China.
  • Department of Materials Science and Engineering, University of Science and Technology of China, Hefei 230026, China.

ORCID-Profile: Xing-Jiu Huang

Förderung

  • National Key Research and Development Program of China
  • Anhui Postdoctoral Science Foundation
  • National Postdoctoral Program for Innovative Talents
  • Hefei Institutes of Physical Science, Chinese Academy of Sciences
  • Youth Innovation Promotion Association of the Chinese Academy of Sciences
  • Fuyang Normal University
  • Hefei Science Center, Chinese Academy of Sciences
  • State Key Laboratory of Electroanalytical Chemistry

Zitieren

APA

Dai, H. H., Cai, X., Liu, Z. H., Xia, R. Z., Zhao, Y. H., Liu, Y. Z., Yang, M., Li, P. H., & Huang, X. J. (2024). Ion-Electron Transduction Layer of the SnS 2 -MoS 2 Heterojunction to Elevate Superior Interface Stability for All-Solid Sodium-Ion Selective Electrode. ACS Sensors. https://doi.org/10.1021/acssensors.3c02185

Vancouver

Dai HH, Cai X, Liu ZH, Xia RZ, Zhao YH, Liu YZ, et al. Ion-Electron Transduction Layer of the SnS 2 -MoS 2 Heterojunction to Elevate Superior Interface Stability for All-Solid Sodium-Ion Selective Electrode. ACS Sensors. 2024. doi:10.1021/acssensors.3c02185

BibTeX
@article{Dai2024,
  author = {Dai, Hai-Hua and Cai, Xin and Liu, Zi-Hao and Xia, Rui-Ze and Zhao, Yong-Huan and Liu, Yang-Zhi and Yang, Meng and Li, Pei-Hua and Huang, Xing-Jiu},
  title = {Ion-Electron Transduction Layer of the SnS 2 -MoS 2 Heterojunction to Elevate Superior Interface Stability for All-Solid Sodium-Ion Selective Electrode},
  journal = {ACS Sensors},
  year = {2024},
  doi = {10.1021/acssensors.3c02185}
}
Kostenlos starten →