EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Quinolinium-Based Fluorescent Probes for Dynamic pH Monitoring in Aqueous Media at High pH Using Fluorescence Lifetime Imaging

Jorrit Bleeker, Aron P Kahn, Lorenz M Baumgartner, Ferdinand C Grozema iD, David A Vermaas iD, Wolter F Jager iD

ACS Sensors · 26.05.2023 · 8 (5) · 2050-2059

DOI: 10.1021/acssensors.3c00316 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Sensors, online erschienen am 27.04.2023. Verfasst von Jorrit Bleeker und 5 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Applied Sciences, Department of Chemical Engineering, Delft University of Technology, Delft 2629 HZ, The Netherlands. Hauptthemen laut MEDLINE: Fluorescent Dyes, Optical Imaging. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: H2020 European Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Spatiotemporal pH imaging using fluorescence lifetime imaging microscopy (FLIM) is an excellent technique for investigating dynamic (electro)chemical processes. However, probes that are responsive at high pH values are not available. Here, we describe the development and application of dedicated pH probes based on the 1-methyl-7-amino-quinolinium fluorophore. The high fluorescence lifetime and quantum yield, the high (photo)stability, and the inherent water solubility make the quinolinium fluorophore well suited for the development of FLIM probes. Due to the flexible fluorophore-spacer-receptor architecture, probe lifetimes are tunable in the pH range between 5.5 and 11. An additional fluorescence lifetime response, at tunable pH values between 11 and 13, is achieved by deprotonation of the aromatic amine at the quinolinium core. Probe lifetimes are hardly affected by temperature and the presence of most inorganic ions, thus making FLIM imaging highly reliable and convenient. At 0.1 mM probe concentrations, imaging at rates of 3 images per second, at a resolution of 4 μm, while measuring pH values up to 12 is achieved. This enables the pH imaging of dynamic electrochemical processes involving chemical reactions and mass transport.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Fluorescent DyesOptical ImagingMicroscopy, FluorescenceHydrogen-Ion ConcentrationWater

Stichwörter der Autor:innen

FLIMFLIM probealkaline pH probingfluorescence lifetimefluorescent pH probemolecular probequinolinium dye

Substanzen

Fluorescent DyesWater

Autor:innen und Institutionen

  • Faculty of Applied Sciences, Department of Chemical Engineering, Delft University of Technology, Delft 2629 HZ, The Netherlands.

ORCID-Profile: Ferdinand C Grozema, David A Vermaas, Wolter F Jager

Förderung

  • H2020 European Research Council

Zitieren

APA

Bleeker, J., Kahn, A. P., Baumgartner, L. M., Grozema, F. C., Vermaas, D. A., & Jager, W. F. (2023). Quinolinium-Based Fluorescent Probes for Dynamic pH Monitoring in Aqueous Media at High pH Using Fluorescence Lifetime Imaging. ACS Sensors, 8(5), 2050-2059. https://doi.org/10.1021/acssensors.3c00316

Vancouver

Bleeker J, Kahn AP, Baumgartner LM, Grozema FC, Vermaas DA, Jager WF. Quinolinium-Based Fluorescent Probes for Dynamic pH Monitoring in Aqueous Media at High pH Using Fluorescence Lifetime Imaging. ACS Sensors. 2023;8(5):2050-2059. doi:10.1021/acssensors.3c00316

BibTeX
@article{Bleeker2023,
  author = {Bleeker, Jorrit and Kahn, Aron P and Baumgartner, Lorenz M and Grozema, Ferdinand C and Vermaas, David A and Jager, Wolter F},
  title = {Quinolinium-Based Fluorescent Probes for Dynamic pH Monitoring in Aqueous Media at High pH Using Fluorescence Lifetime Imaging},
  journal = {ACS Sensors},
  year = {2023},
  volume = {8},
  number = {5},
  pages = {2050--2059},
  doi = {10.1021/acssensors.3c00316}
}
Kostenlos starten →