EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermal Pyocyanin Sensor Based on Molecularly Imprinted Polymers for the Indirect Detection of Pseudomonas aeruginosa

Margaux Frigoli iD, Joseph W Lowdon, Manlio Caldara iD, Rocio Arreguin-Campos iD, Julia Sewall, Thomas J Cleij iD, Hanne Diliën, Kasper Eersels iD, Bart van Grinsven iD

ACS Sensors · 27.01.2023 · 8 (1) · 353-362

DOI: 10.1021/acssensors.2c02345 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Sensors, online erschienen am 04.01.2023. Verfasst von Margaux Frigoli und 8 weiteren Autor:innen. Beteiligte Einrichtung: Sensor Engineering Department, Faculty of Science and Engineering, Maastricht University, P.O. Box 616, 6200 MDMaastricht, The Netherlands. Hauptthemen laut MEDLINE: Molecularly Imprinted Polymers, Molecular Imprinting. Die Arbeit wurde bisher 37-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Interreg Vlaanderen-Nederland.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Pseudomonas aeruginosa is a ubiquitous multi-drug-resistant bacterium, capable of causing serious illnesses and infections. This research focuses on the development of a thermal sensor for the indirect detection of P. aeruginosa infection using molecularly imprinted polymers (MIPs). This was achieved by developing MIPs for the detection of pyocyanin, the main toxin secreted by P. aeruginosa. To this end, phenazine was used as a dummy template, evaluating several polymeric compositions to achieve a selective MIP for pyocyanin recognition. The sensitivity of the synthesized MIPs was investigated by UV-vis analysis, with the best composition having a maximum rebinding capacity of 30 μmol g-1 and an imprinting factor (IF) of 1.59. Subsequently, the MIP particles were immobilized onto planar aluminum chips using an adhesive layer, to perform thermal resistance measurements at clinically relevant concentrations of pyocyanin (1.4-9.8 μM), achieving a limit of detection (LoD) of 0.347 ± 0.027 μM. The selectivity of the sensor was also scrutinized by subjecting the receptor to potential interferents. Furthermore, the rebinding was demonstrated in King's A medium, highlighting the potential of the sensor for the indirect detection of P. aeruginosa in complex fluids. The research culminates in the demonstration of the MIP-based sensor's applicability for clinical diagnosis. To achieve this goal, an experiment was performed in which the sensor was exposed to pyocyanin-spiked saliva samples, achieving a limit of detection of 0.569 ± 0.063 μM and demonstrating that this technology is suitable to detect the presence of the toxin even at the very first stage of its production.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Molecularly Imprinted PolymersMolecular ImprintingPseudomonas aeruginosaPyocyanineElectrochemical Techniques

Stichwörter der Autor:innen

MIP-based sensorPseudomonas aeruginosa detectionbacterial analysisheat-transfer method (HTM)infection controlmolecularly imprinted polymer (MIP)pyocyanin

Substanzen

Molecularly Imprinted PolymersPyocyanine

Autor:innen und Institutionen

  • Sensor Engineering Department, Faculty of Science and Engineering, Maastricht University, P.O. Box 616, 6200 MDMaastricht, The Netherlands.

ORCID-Profile: Margaux Frigoli, Manlio Caldara, Rocio Arreguin-Campos, Thomas J Cleij, Kasper Eersels, Bart van Grinsven

Förderung

  • Interreg Vlaanderen-Nederland

Zitieren

APA

Frigoli, M., Lowdon, J. W., Caldara, M., Arreguin-Campos, R., Sewall, J., Cleij, T. J., Diliën, H., Eersels, K., & van Grinsven, B. (2023). Thermal Pyocyanin Sensor Based on Molecularly Imprinted Polymers for the Indirect Detection of Pseudomonas aeruginosa. ACS Sensors, 8(1), 353-362. https://doi.org/10.1021/acssensors.2c02345

Vancouver

Frigoli M, Lowdon JW, Caldara M, Arreguin-Campos R, Sewall J, Cleij TJ, et al. Thermal Pyocyanin Sensor Based on Molecularly Imprinted Polymers for the Indirect Detection of Pseudomonas aeruginosa. ACS Sensors. 2023;8(1):353-362. doi:10.1021/acssensors.2c02345

BibTeX
@article{Frigoli2023,
  author = {Frigoli, Margaux and Lowdon, Joseph W and Caldara, Manlio and Arreguin-Campos, Rocio and Sewall, Julia and Cleij, Thomas J and Diliën, Hanne and Eersels, Kasper and van Grinsven, Bart},
  title = {Thermal Pyocyanin Sensor Based on Molecularly Imprinted Polymers for the Indirect Detection of Pseudomonas aeruginosa},
  journal = {ACS Sensors},
  year = {2023},
  volume = {8},
  number = {1},
  pages = {353--362},
  doi = {10.1021/acssensors.2c02345}
}
Kostenlos starten →