EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Cross-Linked Poly(Ethylene Carbonate/Ethylene Oxide) Electrolyte for Solid-State Li-Ion Batteries Exploiting Membrane-Electrode Assembly

Nantapat Soontornnon iD, Edoardo Barcaro, Shuto Takayama, Kento Kimura iD, Yoichi Tominaga iD, Jusef Hassoun iD

ACS Polymers Au · 12.08.2026 · 6 (4) · 1072-1087

DOI: 10.1021/acspolymersau.6c00006 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Polymers Au, online erschienen am 03.06.2026. Verfasst von Nantapat Soontornnon und 5 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Global Innovation Research (GIR), Tokyo University of Agriculture and Technology, 3-8-1 Harumi-cho, Fuchu-shi, Tokyo 183-8538, Japan. Die Arbeit nennt 77 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NextGenerationEU, Japan Society for the Promotion of Science, Universit? degli Studi di Ferrara.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Safety concerns of flammable liquid electrolytes as well as challenges related to the use of high-capacity anodes, such as silicon-based ones, are among the bottlenecks for achieving next-generation Li-ion batteries. Herein, we synergistically blend poly(ethylene carbonate) and poly(ethylene oxide) copolymers with complementary molecular weights and cross-linking densities into membranes with lithium bis(fluorosulfonyl)imide (LiFSI) salt concentrated up to 140 mol %. The process leads to membranes without any electrochemical performance-enhancing additive, denoted as additive-free in this work. The thin, mechanically robust, and self-standing cross-linked polymer electrolyte membrane (CP-EM) isused in an all-solid-state battery (ASSB), with scalable LiFePO4 membrane-electrode assembly (LFP-MEA), and a prelithiated silicon oxide-carbon (LiySiOxC) anode. Electrochemical characterization reveals a CP-EM with a high lithium-ion transference number (t+) of 0.61, a low activation energy (Ea) of 0.110 eV, anodic stability exceeding 4.0 V, and a suitable interphase with the lithium metal. The integration of the CP-EM into the proof-of-concept full cell with the LFP-MEA and LiySiOx is conducted with a practical N/P ratio of 1.16. The full cell delivers an initial reversible capacity of ∼140 mAh g–1 at 70 °C, with an average working voltage of 3.2 V and limited polarization. Despite stability and rate capability still needing further improvements, this study offers a synergic design for blending distinct macromolecular architectures, with a specific balance between segmental flexibility for ion transport and structural integrity. The outcomes demonstrate the practical viability of the integrated MEA in scalable full cells operating at relatively high temperatures.

Schlagwörter

Stichwörter der Autor:innen

Li-ion batteryMEAPECPEOcross-linked polymer electrolyte

Autor:innen und Institutionen

  • Institute of Global Innovation Research (GIR), Tokyo University of Agriculture and Technology, 3-8-1 Harumi-cho, Fuchu-shi, Tokyo 183-8538, Japan.
  • Department of Chemical, Pharmaceutical and Agricultural Sciences University of Ferrara, Via Fossato di Mortara 17, Ferrara 44121, Italy.
  • Department of Applied Chemistry, Graduate School of Engineering, Tokyo University of Agriculture and Technology, 2-24-16 Naka-cho, Koganei-shi, Tokyo 184-8588, Japan.
  • Graduate School of Advanced Interdisciplinary Science, Tokyo University of Agriculture and Technology, 2-24-16, Nakamachi, Koganei-shi, Tokyo 184-8588, Japan.
  • Center for Nanotechnology Innovation @NEST, Istituto Italiano di Tecnologia, Piazza San Silvestro 12, Pisa I-56127, Italy.

ORCID-Profile: Nantapat Soontornnon, Kento Kimura, Yoichi Tominaga, Jusef Hassoun

Förderung

  • NextGenerationEU
  • Japan Society for the Promotion of Science
  • Universit? degli Studi di Ferrara
  • Institute of Global Innovation Research, Tokyo University of Agriculture and Technology

Zitieren

APA

Soontornnon, N., Barcaro, E., Takayama, S., Kimura, K., Tominaga, Y., & Hassoun, J. (2026). Cross-Linked Poly(Ethylene Carbonate/Ethylene Oxide) Electrolyte for Solid-State Li-Ion Batteries Exploiting Membrane-Electrode Assembly. ACS Polymers Au, 6(4), 1072-1087. https://doi.org/10.1021/acspolymersau.6c00006

Vancouver

Soontornnon N, Barcaro E, Takayama S, Kimura K, Tominaga Y, Hassoun J. Cross-Linked Poly(Ethylene Carbonate/Ethylene Oxide) Electrolyte for Solid-State Li-Ion Batteries Exploiting Membrane-Electrode Assembly. ACS Polymers Au. 2026;6(4):1072-1087. doi:10.1021/acspolymersau.6c00006

BibTeX
@article{Soontornnon2026,
  author = {Soontornnon, Nantapat and Barcaro, Edoardo and Takayama, Shuto and Kimura, Kento and Tominaga, Yoichi and Hassoun, Jusef},
  title = {Cross-Linked Poly(Ethylene Carbonate/Ethylene Oxide) Electrolyte for Solid-State Li-Ion Batteries Exploiting Membrane-Electrode Assembly},
  journal = {ACS Polymers Au},
  year = {2026},
  volume = {6},
  number = {4},
  pages = {1072--1087},
  doi = {10.1021/acspolymersau.6c00006}
}
Kostenlos starten →