EUVIMEDEUVIMED entdecken
Crossref

Low-Insertion-Loss and Ultracompact Multicore Fiber Fan-In/Out Device Fabricated by In Situ 3D Nanoprinting

Hongfei Chen, Yaoming Feng, Hanyu Gao, Ruqi Chen, Zhenfeng Zhong, Jiying Huang, Bofan Guo, Shecheng Gao, Jiajing Tu, Zhaohui Li

ACS Photonics · 04.11.2026

DOI: 10.1021/acsphotonics.6c02600 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Photonics, online erschienen am 04.11.2026. Verfasst von Hongfei Chen und 9 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Gefördert von: Guangdong Provincial Department of Science and Technology, Southern Marine Science and Engineering Guangdong Laboratory (Zhuhai), National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Space-division multiplexing (SDM) using multicore fibers (MCFs) addresses the capacity bottleneck in single-mode fiber communications. Fan-in/fan-out (FIFO) devices interfacing MCFs with single-mode fiber arrays are essential for SDM systems, yet conventional fabrication suffers from precise alignment, complex packaging, and large footprints. We demonstrate an ultracompact, low-insertion-loss, 4-channel MCF FIFO device fabricated by in situ 3D nanoprinting via two-photon polymerization. The device monolithically integrates parabolic total internal reflection (TIR) bridge structures onto the end faces of a 4-core MCF and a single-mode fiber array, eliminating active core-to-core alignment and postfabrication assembly. The 3D structure has a height of only 60 μm and functions as a reflective 4f imaging system, ensuring diffraction-limited mode-field transfer. The FIFO exhibits a low insertion loss of ∼0.46 dB, intercore crosstalk below −50 dB at 1550 nm, and broadband operation across the S, C, and L bands. Its viability is validated through an offline 24 GBaud Dual-Polarization Quadrature Phase Shift Keying (DP-QPSK) recirculating transmission experiment over 1058.4 km (14 loops × 75.6 km) covering 186 channels, with all bit-error rates below the FEC threshold. With simple fabrication, low loss, alignment-free operation, and ultracompact footprint, this technique presents a promising and scalable solution for efficient photonic interfacing in SDM systems.

Förderung

  • Guangdong Provincial Department of Science and Technology
  • Southern Marine Science and Engineering Guangdong Laboratory (Zhuhai)
  • National Natural Science Foundation of China

Zitieren

APA

Chen, H., Feng, Y., Gao, H., Chen, R., Zhong, Z., Huang, J., Guo, B., Gao, S., Tu, J., & Li, Z. (2026). Low-Insertion-Loss and Ultracompact Multicore Fiber Fan-In/Out Device Fabricated by In Situ 3D Nanoprinting. ACS Photonics. https://doi.org/10.1021/acsphotonics.6c02600

Vancouver

Chen H, Feng Y, Gao H, Chen R, Zhong Z, Huang J, et al. Low-Insertion-Loss and Ultracompact Multicore Fiber Fan-In/Out Device Fabricated by In Situ 3D Nanoprinting. ACS Photonics. 2026. doi:10.1021/acsphotonics.6c02600

BibTeX
@article{Chen2026,
  author = {Chen, Hongfei and Feng, Yaoming and Gao, Hanyu and Chen, Ruqi and Zhong, Zhenfeng and Huang, Jiying and Guo, Bofan and Gao, Shecheng and Tu, Jiajing and Li, Zhaohui},
  title = {Low-Insertion-Loss and Ultracompact Multicore Fiber Fan-In/Out Device Fabricated by In Situ 3D Nanoprinting},
  journal = {ACS Photonics},
  year = {2026},
  doi = {10.1021/acsphotonics.6c02600}
}
Kostenlos starten →