Quantum Barrier Engineering Enables Carrier Redistribution for High-Efficiency Green InGaN Micro-LEDs at Reduced Operating Current Density
ACS Photonics · 04.11.2026 · 13 (21) · 6510-6520
DOI: 10.1021/acsphotonics.6c01862 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Photonics, online erschienen am 21.10.2026. Verfasst von Chunyu Liu und 7 weiteren Autor:innen. Die Arbeit nennt 62 Literaturangaben. Gefördert von: National Basic Research Program of China (973 Program), National Natural Science Foundation of China (NSFC).
Abstract (Originalsprache)
Achieving high efficiency in green InGaN microlight-emitting diodes (Micro-LEDs) at low current densities required for active-matrix microdisplays is fundamentally limited by inefficient hole transport and nonuniform carrier distribution in multiple quantum wells (MQWs). Here, we systematically investigate the influence of quantum barrier (QB) thickness and the number of MQW periods on the low-current performance of green Micro-LEDs. Increasing the QB thickness from 10 to 25 nm significantly improves the MQW interface quality and enhances the peak wall-plug efficiency (WPE) to 52.4% at an ultralow current density of 0.42 A·cm–2, corresponding to a peak external quantum efficiency of 48.1%. Carrier transport analysis reveals that thicker QBs suppress interwell hole transport, promote carrier localization within the radiatively active quantum wells near the p-side, and enhance electron–hole overlap, thereby reducing Shockley-Read-Hall (SRH) recombination and shifting the transition from SRH to radiative-dominated recombination from 5.71 to 1.87 A·cm–2. Furthermore, optimization of the MQW period number identifies a five-period active region that maximizes carrier utilization while maintaining sufficient effective recombination volume. These results establish a unified active-region design principle in which QB engineering controls the number of effectively radiative quantum wells, enabling MQWs to be optimized for high-efficiency III-nitride Micro-LEDs operating under display-relevant low-current conditions.
Förderung
- National Basic Research Program of China (973 Program)
- National Natural Science Foundation of China (NSFC)
Zitieren
APA
Liu, C., Lu, W., Yang, X., Lin, Y., Li, J., Huang, K., Bi, Z., & Zhang, R. (2026). Quantum Barrier Engineering Enables Carrier Redistribution for High-Efficiency Green InGaN Micro-LEDs at Reduced Operating Current Density. ACS Photonics, 13(21), 6510-6520. https://doi.org/10.1021/acsphotonics.6c01862
Vancouver
Liu C, Lu W, Yang X, Lin Y, Li J, Huang K, et al. Quantum Barrier Engineering Enables Carrier Redistribution for High-Efficiency Green InGaN Micro-LEDs at Reduced Operating Current Density. ACS Photonics. 2026;13(21):6510-6520. doi:10.1021/acsphotonics.6c01862
BibTeX
@article{Liu2026,
author = {Liu, Chunyu and Lu, Weifang and Yang, Xu and Lin, Yizhan and Li, Jinchai and Huang, Kai and Bi, Zhaoxia and Zhang, Rong},
title = {Quantum Barrier Engineering Enables Carrier Redistribution for High-Efficiency Green InGaN Micro-LEDs at Reduced Operating Current Density},
journal = {ACS Photonics},
year = {2026},
volume = {13},
number = {21},
pages = {6510--6520},
doi = {10.1021/acsphotonics.6c01862}
}
EUVIMED