EUVIMEDEUVIMED entdecken
Crossref

Sequential Stabilization for Color-Stable Deep-Blue Mixed-Halide Perovskite Light-Emitting Diodes

Hyojun Kim, Seungjae Lee, Junho Kim, Heeseung Lee, Seyun Lee, Hyuncheol Do, Jeongheon Park, Changsoon Cho, Jung-Yong Lee

ACS Photonics · 04.11.2026 · 13 (21) · 6467-6477

DOI: 10.1021/acsphotonics.6c01700 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Photonics, online erschienen am 23.10.2026. Verfasst von Hyojun Kim und 8 weiteren Autor:innen. Die Arbeit nennt 67 Literaturangaben. Gefördert von: National Research Foundation of Korea.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Perovskite light-emitting diodes (PeLEDs) have emerged as promising candidates for next-generation displays due to their low-cost fabrication and narrow emission bandwidths. Nonetheless, deep-blue PeLEDs still lag behind red and green devices in both efficiency and operational stability. Among various strategies for blue emission, including quantum confinement and wide-bandgap cation engineering, mixed-halide perovskites remain the most practical route to achieve deep-blue wavelengths. A key challenge in these systems arises from the weak ionic interaction between chloride (Cl–) and lead (Pb2+), which leads to a low formation energy of chloride vacancies. These vacancies serve as initiation sites for halide segregation, resulting in severe spectral instability under electrical bias. Although ligand-assisted precursor engineering can partially suppress vacancy formation, complete elimination remains difficult due to ligand loss during crystallization. Here, we present a solvent-compatible sequential stabilization (SCSS) strategy employing 3-(triphenylphosphonio) propane-1-sulfonate (TPPPS) on a propanesulfonate (PS)-treated perovskite layer. This strategy effectively neutralizes chloride vacancies and suppresses halide phase segregation, enabling spectrally stable deep-blue emission at 463 nm over a wide bias range, with an external quantum efficiency (EQE) of 9.4% and a maximum luminance (Lmax) of 353.2 cd/m2.

Förderung

  • National Research Foundation of Korea

Zitieren

APA

Kim, H., Lee, S., Kim, J., Lee, H., Lee, S., Do, H., Park, J., Cho, C., & Lee, J. (2026). Sequential Stabilization for Color-Stable Deep-Blue Mixed-Halide Perovskite Light-Emitting Diodes. ACS Photonics, 13(21), 6467-6477. https://doi.org/10.1021/acsphotonics.6c01700

Vancouver

Kim H, Lee S, Kim J, Lee H, Lee S, Do H, et al. Sequential Stabilization for Color-Stable Deep-Blue Mixed-Halide Perovskite Light-Emitting Diodes. ACS Photonics. 2026;13(21):6467-6477. doi:10.1021/acsphotonics.6c01700

BibTeX
@article{Kim2026,
  author = {Kim, Hyojun and Lee, Seungjae and Kim, Junho and Lee, Heeseung and Lee, Seyun and Do, Hyuncheol and Park, Jeongheon and Cho, Changsoon and Lee, Jung-Yong},
  title = {Sequential Stabilization for Color-Stable Deep-Blue Mixed-Halide Perovskite Light-Emitting Diodes},
  journal = {ACS Photonics},
  year = {2026},
  volume = {13},
  number = {21},
  pages = {6467--6477},
  doi = {10.1021/acsphotonics.6c01700}
}
Kostenlos starten →