Germanium–Tin (GeSn) Avalanche Photodiode with up to 2.7 μm Cutoff Wavelength for Extended SWIR Detection
ACS Photonics · 04.11.2026 · 13 (21) · 6348-6357
DOI: 10.1021/acsphotonics.6c00810 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Photonics, online erschienen am 10.10.2026. Verfasst von Quang Minh Thai und 13 weiteren Autor:innen. Die Arbeit nennt 55 Literaturangaben. Gefördert von: Air Force Research Laboratory, Science, Mathematics, And Research For Transformation Scholarship Program, Office of Science.
Abstract (Originalsprache)
Separate absorption-charge multiplication (SACM) germanium–tin on silicon (GeSn on Si) avalanche photodiode (APD) offers a viable solution to achieve CMOS-compatible detection technology in short-wave infrared (SWIR)/extended SWIR (e-SWIR) range, leveraging the low k-factor of Si multiplication layer and SWIR/e-SWIR band absorption of GeSn. However, unlike the well-established growth of GeSn on Si with thick Ge buffer in between to reduce threading dislocation density due to lattice mismatch, GeSn on Si APD design requires relatively thin Ge buffer to limit electric field drop through the background p-doped buffer and efficiently transport photocarriers from the GeSn absorber to Si multiplication layer, therefore making the growth of high-Sn content APD for e-SWIR coverage very challenging. In this work, we experimentally demonstrate GeSn on Si APD up to 12.7% Sn, monolithically grown on Si substrate with 122 nm thick Ge buffer in between, which is considerably thinner than the widely used 700–900 nm thick Ge buffer. Stronger relaxation of GeSn absorber via thin Ge buffer favors Sn incorporation, leading to higher Sn content than the nominal target of 8% Sn. Device detection range is significantly improved compared to previous works─with the cutoff wavelength increased up to 2.7 μm at 300 K─in parallel with good responsivity in the SWIR/e-SWIR range, up to 1.45 A W–1 at 1.55 μm and 0.66 A W–1 at 2 μm at 77 K, corresponding to the lowest estimation of avalanche gain of 5.8 and 3 calculated based on the maximum primary responsivity. The validity of avalanche gain calculation using punch-through bias will be discussed for the case of partial depletion in the GeSn absorber.
Förderung
- Air Force Research Laboratory
- Science, Mathematics, And Research For Transformation Scholarship Program
- Office of Science
- Northrop Grumman
- U.S. Air Force
- National Nuclear Security Administration
Zitieren
APA
Thai, Q. M., Kumar, R., Rudie, J., Wang, X., Ali, A. S., Grant, P. C., Stanchu, H., Qiu, Y., Akwabli, S., Chang, C., Liu, J., Li, B., Du, W., & Yu, S. (2026). Germanium–Tin (GeSn) Avalanche Photodiode with up to 2.7 μm Cutoff Wavelength for Extended SWIR Detection. ACS Photonics, 13(21), 6348-6357. https://doi.org/10.1021/acsphotonics.6c00810
Vancouver
Thai QM, Kumar R, Rudie J, Wang X, Ali AS, Grant PC, et al. Germanium–Tin (GeSn) Avalanche Photodiode with up to 2.7 μm Cutoff Wavelength for Extended SWIR Detection. ACS Photonics. 2026;13(21):6348-6357. doi:10.1021/acsphotonics.6c00810
BibTeX
@article{Thai2026,
author = {Thai, Quang Minh and Kumar, Rajesh and Rudie, Justin and Wang, Xiaoxin and Ali, Abdulla Said and Grant, Perry C. and Stanchu, Hryhorii and Qiu, Yunsheng and Akwabli, Steven and Chang, Chun-Chieh and Liu, Jifeng and Li, Baohua and Du, Wei and Yu, Shui-Qing},
title = {Germanium–Tin (GeSn) Avalanche Photodiode with up to 2.7 μm Cutoff Wavelength for Extended SWIR Detection},
journal = {ACS Photonics},
year = {2026},
volume = {13},
number = {21},
pages = {6348--6357},
doi = {10.1021/acsphotonics.6c00810}
}
EUVIMED