EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Reactive-Extruded PLA/PBAT/Bentonite Nanocomposites for Diffusion-Controlled Urea Release in Sustainable Fertilizer Systems

Renan Henriques Gonçalves de Almeida, David Gonçalves Pena, Luiz Carlos Bertolino, Ana Maria Furtado de Sousa, Elen Beatriz Acordi Vasques Pacheco, Murilo Barbosa Valério, Ana Lúcia Nazareth da Silva

ACS Omega · 19.11.2026

DOI: 10.1021/acsomega.6c11349 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 19.11.2026. Verfasst von Renan Henriques Gonçalves de Almeida und 6 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Conselho Nacional de Desenvolvimento Cient?fico e Tecnol?gico, Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Approximately 70% of conventional fertilizers applied to soil are lost to the environment, mainly through leaching, especially in sandy and organic soils. This inefficiency increases environmental impact and reduces nutrient use efficiency. Controlled-release fertilizers (CRFs) have emerged as a viable strategy to regulate nutrient availability over time. In this context, biodegradable polymers are promising coating materials due to their ability to degrade gradually in soil. Blends based on poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) have been investigated; however, their thermodynamic immiscibility compromises interfacial adhesion and overall performance. To overcome this limitation, in situ reactive extrusion was employed using maleic anhydride as a grafting agent and dicumyl peroxide as an initiator, aiming to enhance phase compatibility. Additionally, the fully organomodified bentonite clay was incorporated as a functional filler and urea adsorbent. PLA/PBAT (70/30 wt %) system containing 2 phr maleic anhydride, 1 phr dicumyl peroxide, and 3 wt % bentonite was processed under different screw speeds and feed rates to determine the optimal conditions of processing. The composites were characterized in terms of thermal behavior, morphology, and water absorption. The optimal formulation, obtained at lower screw speed and higher feed rate, exhibited improved physicochemical properties. A CRF was produced by adding 10 wt % of urea to the optimized system. Leaching tests demonstrated gradual nutrient release, with a maximum released fraction 20.7% lower than that of the PLA/PBAT/urea system without bentonite clay, confirming the positive effect of bentonite on nutrient retention and controlled-release performance.

Förderung

  • Conselho Nacional de Desenvolvimento Cient?fico e Tecnol?gico
  • Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior

Zitieren

APA

Almeida, R. H. G. D., Pena, D. G., Bertolino, L. C., Sousa, A. M. F. D., Pacheco, E. B. A. V., Valério, M. B., & Silva, A. L. N. D. (2026). Reactive-Extruded PLA/PBAT/Bentonite Nanocomposites for Diffusion-Controlled Urea Release in Sustainable Fertilizer Systems. ACS Omega. https://doi.org/10.1021/acsomega.6c11349

Vancouver

Almeida RHGD, Pena DG, Bertolino LC, Sousa AMFD, Pacheco EBAV, Valério MB, et al. Reactive-Extruded PLA/PBAT/Bentonite Nanocomposites for Diffusion-Controlled Urea Release in Sustainable Fertilizer Systems. ACS Omega. 2026. doi:10.1021/acsomega.6c11349

BibTeX
@article{Almeida2026,
  author = {Almeida, Renan Henriques Gonçalves de and Pena, David Gonçalves and Bertolino, Luiz Carlos and Sousa, Ana Maria Furtado de and Pacheco, Elen Beatriz Acordi Vasques and Valério, Murilo Barbosa and Silva, Ana Lúcia Nazareth da},
  title = {Reactive-Extruded PLA/PBAT/Bentonite Nanocomposites for Diffusion-Controlled Urea Release in Sustainable Fertilizer Systems},
  journal = {ACS Omega},
  year = {2026},
  doi = {10.1021/acsomega.6c11349}
}
Kostenlos starten →