Study on the Uniaxial Compressive Mechanical Properties and Instability Mechanism of Fractured Coal–Rock Composite Bodies
ACS Omega · 18.11.2026
DOI: 10.1021/acsomega.6c11049 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Omega, online erschienen am 18.11.2026. Verfasst von Hua Liu und 4 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Natural Science Foundation of China, Henan Polytechnic University, Sponsored by Program for Science and Technology Innovation Talents in Universities of Henan Province.
Abstract (Originalsprache)
In coal–rock systems, the weak interlayer zones between coal and rock strata are primary regions for fracture distribution, and the presence of fractures within the coal significantly influences the mechanical properties and engineering stability of coal–rock assemblages. Therefore, investigating the mechanical behavior and failure characteristics of coal–rock assemblages containing fractured coal is of great significance for controlling the stability of deep coal–rock engineering projects and preventing dynamic disasters. To investigate the impact of fractured coal on the mechanical characteristics of coal–rock systems, uniaxial compression experiments were conducted on coal–rock composite bodies with different fracture angles. The results indicate that as the fracture inclination angle increased from 0° to 90°, the average peak strength of the composites rose from 6.41 to 13.09 MPa; however, these values remained significantly lower than that of the intact composite (22.56 MPa), representing a reduction of 41.71% to 71.59%. During the uniaxial compression process, the internal energy of the samples is converted into the expansion of macroscopic cracks, and the failure modes are primarily tensile failure and shear failure. The total energy and dissipated energy of the composite specimens increase with the fracture angle, with the total elastic strain energy being greater than the dissipated energy at the point of failure. By analyzing the energy accumulation and transfer processes of the coal and rock during loading, the accumulation and distribution patterns of elastic strain energy under loading were revealed. An energy transfer model for fissured coal–rock composites was established, and the energy transfer and fissure evolution mechanisms during the instability and failure process of the composite were analyzed. The results provide valuable references for understanding the mechanical properties of deep coal–rock systems and the mechanisms of dynamic disasters.
Förderung
- National Natural Science Foundation of China
- Henan Polytechnic University
- Sponsored by Program for Science and Technology Innovation Talents in Universities of Henan Province
- Incubation Program for the Creation of "Double world-class" Projects
- Funding Program for Cultivating High-Level Talents for the Creation of "Double- world-class" Security Disciplines
- hongyuan Talent Program-Zhongyuan Top Talent, China
Zitieren
APA
Liu, H., Huang, L., Cui, J., Zhang, J., & Shi, Z. (2026). Study on the Uniaxial Compressive Mechanical Properties and Instability Mechanism of Fractured Coal–Rock Composite Bodies. ACS Omega. https://doi.org/10.1021/acsomega.6c11049
Vancouver
Liu H, Huang L, Cui J, Zhang J, Shi Z. Study on the Uniaxial Compressive Mechanical Properties and Instability Mechanism of Fractured Coal–Rock Composite Bodies. ACS Omega. 2026. doi:10.1021/acsomega.6c11049
BibTeX
@article{Liu2026,
author = {Liu, Hua and Huang, Laisheng and Cui, Junqi and Zhang, Junxiang and Shi, Zhen},
title = {Study on the Uniaxial Compressive Mechanical Properties and Instability Mechanism of Fractured Coal–Rock Composite Bodies},
journal = {ACS Omega},
year = {2026},
doi = {10.1021/acsomega.6c11049}
}
EUVIMED