EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Composable 3D-Printed Platform for Rapid Sequential Sample Injection in Mass Spectrometry

Olanrewaju Awoyemi, Amanda Overby, Herbi Yuliantoro, Samuel Fisher, Stephen J. Valentine, Peng Li

ACS Omega · 03.11.2026

DOI: 10.1021/acsomega.6c10346 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 03.11.2026. Verfasst von Olanrewaju Awoyemi und 5 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Institutes of Health, National Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We developed a composable 3D-printed platform for rapid sequential sample injection in mass spectrometry (MS). The platform works in a well plate-like format and allows direct loading of discrete sample droplets by micropipette or automated liquid handling. Droplets are separated by air gaps during transport and are directly coupled to MS through capillary vibrating sharp-edge spray ionization (cVSSI). Liquid-infused surface treatment was used to improve compatibility of the 3D-printed microchannels with MS analysis. The platform was evaluated for device operation, throughput, quantitative performance, and carryover. A throughput of ∼20 s per sample was achieved at 50 μL/min. Quantitative analysis of lysine gave a linear response with R2 = 0.9986, and carryover was evaluated across chemically distinct small molecules. These results demonstrate that the platform supports air-separated droplet transport, rapid sequential analysis of different samples, and quantitative MS measurements in a simple, modular, and customizable format.

Förderung

  • National Institutes of Health
  • National Science Foundation

Zitieren

APA

Awoyemi, O., Overby, A., Yuliantoro, H., Fisher, S., Valentine, S. J., & Li, P. (2026). A Composable 3D-Printed Platform for Rapid Sequential Sample Injection in Mass Spectrometry. ACS Omega. https://doi.org/10.1021/acsomega.6c10346

Vancouver

Awoyemi O, Overby A, Yuliantoro H, Fisher S, Valentine SJ, Li P. A Composable 3D-Printed Platform for Rapid Sequential Sample Injection in Mass Spectrometry. ACS Omega. 2026. doi:10.1021/acsomega.6c10346

BibTeX
@article{Awoyemi2026,
  author = {Awoyemi, Olanrewaju and Overby, Amanda and Yuliantoro, Herbi and Fisher, Samuel and Valentine, Stephen J. and Li, Peng},
  title = {A Composable 3D-Printed Platform for Rapid Sequential Sample Injection in Mass Spectrometry},
  journal = {ACS Omega},
  year = {2026},
  doi = {10.1021/acsomega.6c10346}
}
Kostenlos starten →