Experimental Investigation of Macroscopic–Mesoscopic Mechanical Responses and Combined Modification Mechanism of Polymer-Fiber Modified Coal Gangue-Based Shotcrete
ACS Omega · 10.11.2026
DOI: 10.1021/acsomega.6c10183 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Omega, online erschienen am 10.11.2026. Verfasst von Shenyang Ouyang und 5 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: China Postdoctoral Science Foundation, Fundamental Research Funds for the Central Universities, National Natural Science Foundation of China.
Abstract (Originalsprache)
To address the insufficient workability, pronounced brittleness, and limited crack resistance of coal gangue-based shotcrete, basalt fiber (BF) and styrene–butadiene rubber latex (SBR) were selected for combined modification. A Box–Behnken response surface methodology (RSM) was employed to design the experiments, with BF volume fraction (0.1–0.5%), BF length (6–18 mm), and SBR content (5–15%) selected as the influencing factors. Quadratic regression models were established for slump, rebound rate, 28 day uniaxial compressive strength (UCS), and 28 day splitting tensile strength (STS), and the optimal mixture proportion was obtained through multiobjective optimization. X-ray diffraction (XRD), scanning electron microscopy coupled with energy-dispersive spectroscopy (SEM-EDS), Fourier-transform infrared spectroscopy (FT-IR), and mercury intrusion porosimetry (MIP) were employed to elucidate the combined modification mechanism, including phase composition, microscopic morphology, chemical structure, and pore characteristics. The results demonstrated that all response surface models exhibited high fitting accuracy (with R2 > 0.98) and excellent predictive capability. BF volume fraction was identified as the most significant factor affecting the four investigated performance indicators, followed by BF length and SBR content. With increasing BF volume fraction and length, the slump generally decreased, while the rebound rate increased. The UCS was adversely affected to some extent, whereas the STS exhibited an initial increase followed by a subsequent decrease. Notably, the adverse effect of high fiber content combined with longer fibers on UCS became more pronounced. SBR exhibited a significant nonlinear regulatory effect on the material properties, with an optimal dosage of approximately 10%. Multiobjective optimization yielded an optimal mixture consisting of 0.3% BF volume fraction, 12 mm BF length, and 10% SBR content. The validation tests showed that the slump, rebound rate, 28 day UCS, and STS were 97.3 mm, 14.7%, 21.45 MPa, and 2.92 MPa, respectively, with relative errors between the experimental and predicted values below 5%. Microscopic analyses revealed that the incorporation of BF and SBR did not alter the types of primary hydration products but promoted the continuous distribution of hydration products and improved the fiber-matrix interfacial characteristics. The porosity of the optimized mixture decreased from 26.14% to 14.43%, accompanied by ∼42.05% reduction in cumulative mercury intrusion volume. BF inhibited crack propagation through crack bridging and pull-out energy dissipation, while SBR optimized stress transfer conditions through pore filling and interfacial enhancement.
Förderung
- China Postdoctoral Science Foundation
- Fundamental Research Funds for the Central Universities
- National Natural Science Foundation of China
Zitieren
APA
Ouyang, S., Li, J., Li, C., Huang, Y., Wu, X., & Wang, M. (2026). Experimental Investigation of Macroscopic–Mesoscopic Mechanical Responses and Combined Modification Mechanism of Polymer-Fiber Modified Coal Gangue-Based Shotcrete. ACS Omega. https://doi.org/10.1021/acsomega.6c10183
Vancouver
Ouyang S, Li J, Li C, Huang Y, Wu X, Wang M. Experimental Investigation of Macroscopic–Mesoscopic Mechanical Responses and Combined Modification Mechanism of Polymer-Fiber Modified Coal Gangue-Based Shotcrete. ACS Omega. 2026. doi:10.1021/acsomega.6c10183
BibTeX
@article{Ouyang2026,
author = {Ouyang, Shenyang and Li, Junmeng and Li, Chenyang and Huang, Yanli and Wu, Xiangru and Wang, Maozhe},
title = {Experimental Investigation of Macroscopic–Mesoscopic Mechanical Responses and Combined Modification Mechanism of Polymer-Fiber Modified Coal Gangue-Based Shotcrete},
journal = {ACS Omega},
year = {2026},
doi = {10.1021/acsomega.6c10183}
}
EUVIMED