Electrical and Thermal Transport in CaCO3 Graphene Nanocomposites Derived from Oyster Shell Waste
ACS Omega · 03.11.2026 · 11 (43) · 67843-67852
DOI: 10.1021/acsomega.6c09705 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Omega, online erschienen am 21.10.2026. Verfasst von Chiara Marchini und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry "Giacomo Ciamician", University of Bologna, Via Piero Gobetti 85, 40129 Bologna, Italy. Die Arbeit nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NextGenerationEU, National Recovery and Resilience Plan.
Abstract (Originalsprache)
Waste oyster shells provide a calcium carbonate, as Mg-calcite, feedstock for functional mineral composites. Here, shell-derived biogenic calcium carbonate (BCC) and few-layer graphene (FLG; nominally 1, 5, 7, and 10 wt % relative to BCC) were processed by aqueous planetary ball milling with Pluronic P123. Microscopy, diffraction, spectroscopy, thermogravimetry, and transport measurements were combined to examine the resulting powders and pressed pellets. Mg-calcite nanocrystallites and graphene sheets coexisted within micrometer-scale aggregates, with mineral particles preferentially observed near sheet edges. At 25 °C, the thermal conductivity of the 10 wt % formulation was 0.516 W·m–1·K–1, compared with 0.194 W·m–1·K–1 for the dry-milled shell. This approximately 166% reference-to-composite difference combines changes in composition and processing and cannot be assigned to FLG addition alone. Stable electrical measurements were obtained from 5 wt % FLG; the reported resistivity of the 10 wt % formulation was approximately 0.50 Ω·cm. The shell organic matrix may contribute to interfacial interactions, although its effect cannot be distinguished from those of Pluronic and processing in the present experiments. The observed transport differences among the prepared formulations provide a basis for future studies using matched processing controls to clarify the contribution of each constituent.
Autor:innen und Institutionen
- Department of Chemistry "Giacomo Ciamician", University of Bologna, Via Piero Gobetti 85, 40129 Bologna, Italy.
- Department of Industrial Engineering and INSTM Research Unit, University of Trento, Via Sommarive 9, 38123 Trento, Italy.
- Marine Science Group, Department of Biological, Geological and Environmental Sciences, University of Bologna, Via F. Selmi 3, 40126 Bologna, Italy.
- Fano Marine Center, The Inter-Institute Center for Research on Marine Biodiversity, Resources and Biotechnologies, Viale Adriatico 1/N, 61032 Fano, Italy.
- Consiglio Nazionale delle Ricerche, Istituto per lo Studio dei Materiali Nanostrutturati (CNR-ISMN), Via P. Gobetti 101, 40129 Bologna, Italy.
- Interdepartmental Centre for Industrial Research Health Sciences & Technologies, University of Bologna, 40064 Bologna, Italy.
ORCID-Profile: Giulia Fredi, Giuseppe Falini, Devis Montroni
Förderung
- NextGenerationEU
- National Recovery and Resilience Plan
Zitieren
APA
Marchini, C., Fredi, G., Goffredo, S., Gradone, A., Migliori, A., Fermani, S., Falini, G., & Montroni, D. (2026). Electrical and Thermal Transport in CaCO3 Graphene Nanocomposites Derived from Oyster Shell Waste. ACS Omega, 11(43), 67843-67852. https://doi.org/10.1021/acsomega.6c09705
Vancouver
Marchini C, Fredi G, Goffredo S, Gradone A, Migliori A, Fermani S, et al. Electrical and Thermal Transport in CaCO3 Graphene Nanocomposites Derived from Oyster Shell Waste. ACS Omega. 2026;11(43):67843-67852. doi:10.1021/acsomega.6c09705
BibTeX
@article{Marchini2026,
author = {Marchini, Chiara and Fredi, Giulia and Goffredo, Stefano and Gradone, Alessandro and Migliori, Andrea and Fermani, Simona and Falini, Giuseppe and Montroni, Devis},
title = {Electrical and Thermal Transport in CaCO3 Graphene Nanocomposites Derived from Oyster Shell Waste},
journal = {ACS Omega},
year = {2026},
volume = {11},
number = {43},
pages = {67843--67852},
doi = {10.1021/acsomega.6c09705}
}
EUVIMED