EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

High-Performing and Stable Membrane Electrode Assemblies Based on Fluorine-Doped Tin Oxide Catalysts

Sofia Delgado, Vincent Wilke, Rita Marques, Jonathan Ruiz Esquius, Aldo Gago iD, Fátima Santos iD, Andreas Friedrich iD, Adélio Mendes iD

ACS Omega · 10.11.2026 · 11 (44) · 69026-69037

DOI: 10.1021/acsomega.6c08923 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 29.10.2026. Verfasst von Sofia Delgado und 7 weiteren Autor:innen. Beteiligte Einrichtung: LEPABE - Laboratory for Process Engineering, Environment, Biotechnology and Energy, ALiCE - Associate Laboratory in Chemical Engineering, Faculty of …. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: European Commission, NextGenerationEU, Minist??rio da Educa????o e Ci??ncia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To improve the iridium utilization on proton exchange membrane water electrolysers (PEMWEs), a new support based on fluorine-doped tin oxide (FTO) nanoparticles was developed, characterized, and assessed for the anode side. This approach utilizes a sol–gel method combined with a 500 °C annealing treatment to promote favorable metal–support interactions and contribute to catalyst stability. The resulting IrOx/FTO catalyst exhibits remarkable performance at a low Ir loading of 0.5 mgIr cm–2, corresponding to half the loading of the commercial IrO2 reference. The membrane electrode assembly (MEA) incorporating the FTO-based anode outperformed the electrolyzer employing commercial IrO2, reaching 1.35 A cm–2 at 2 V and 60 °C compared with 0.9 A cm–2 for the commercial catalyst. Moreover, these catalysts demonstrated excellent operational stability, with no significant activity decline during more than 300 h of continuous operation at 1.3 A cm–2 and 80 °C. These findings pave the way for innovative and cost-effective membrane electrode assemblies with enhanced stability.

Autor:innen und Institutionen

  • LEPABE - Laboratory for Process Engineering, Environment, Biotechnology and Energy, ALiCE - Associate Laboratory in Chemical Engineering, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, Porto 4200-46…
  • Institute of Engineering Thermodynamics/Electrochemical Energy Technology, German Aerospace Center (DLR), Pfaffenwaldring 38-40, Stuttgart 70569, Germany.
  • Carbon Science and Technology Institute, INCAR-CSIC, Francisco Pintado Fe 26, Oviedo 33011, Spain.
  • Clean Energy Cluster, International Iberian Nanotechnology Laboratory, Av. Mestre José Veiga, Braga 4715-330, Portugal.

ORCID-Profile: Aldo Gago, Fátima Santos, Andreas Friedrich, Adélio Mendes

Förderung

  • European Commission
  • NextGenerationEU
  • Minist??rio da Educa????o e Ci??ncia
  • Horizon 2020

Zitieren

APA

Delgado, S., Wilke, V., Marques, R., Esquius, J. R., Gago, A., Santos, F., Friedrich, A., & Mendes, A. (2026). High-Performing and Stable Membrane Electrode Assemblies Based on Fluorine-Doped Tin Oxide Catalysts. ACS Omega, 11(44), 69026-69037. https://doi.org/10.1021/acsomega.6c08923

Vancouver

Delgado S, Wilke V, Marques R, Esquius JR, Gago A, Santos F, et al. High-Performing and Stable Membrane Electrode Assemblies Based on Fluorine-Doped Tin Oxide Catalysts. ACS Omega. 2026;11(44):69026-69037. doi:10.1021/acsomega.6c08923

BibTeX
@article{Delgado2026,
  author = {Delgado, Sofia and Wilke, Vincent and Marques, Rita and Esquius, Jonathan Ruiz and Gago, Aldo and Santos, Fátima and Friedrich, Andreas and Mendes, Adélio},
  title = {High-Performing and Stable Membrane Electrode Assemblies Based on Fluorine-Doped Tin Oxide Catalysts},
  journal = {ACS Omega},
  year = {2026},
  volume = {11},
  number = {44},
  pages = {69026--69037},
  doi = {10.1021/acsomega.6c08923}
}
Kostenlos starten →