EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

UV-Electrochemical Catalytic Oxidation of Quinoline-Containing Wastewater Using an IrO2-Based Anode: COD Reduction, Degradation Kinetics, and Transformation Pathway

Kejia Ning, Han Yang, Xin Sun, Shan Li, Jiulong Cui, Lin Ma, Yanyan Deng, Xiaoke Li, Gen Huang, Zechao Huangfu, Pengfei Zhao, Qiming Zhuo

ACS Omega · 07.11.2026

DOI: 10.1021/acsomega.6c08661 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 07.11.2026. Verfasst von Kejia Ning und 11 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Fundamental Research Funds for the Central Universities, National Natural Science Foundation of China, Ordos Postdoctoral Research Fund.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Quinoline is a refractory nitrogen-containing pollutant commonly found in coal chemical, coking, pharmaceutical, and dye wastewater. Although advanced oxidation processes have shown potential for quinoline removal, an integrated understanding of pollutant removal, COD reduction, degradation kinetics, and intermediate transformation in UV-electrochemical systems remains limited. In this study, simulated quinoline-containing wastewater was treated using a dual-wavelength UV-electrochemical catalytic oxidation system equipped with a commercial Ti/IrO2 anode and a stainless-steel cathode. The effects of current density, electrolysis time, NaCl concentration, and initial pH on quinoline degradation were systematically investigated, while COD reduction, degradation kinetics, and intermediate transformation were further evaluated by HPLC and GC-MS. Under a current density of 30 mA/cm2, NaCl concentration of 0.5 mol/L, near-neutral initial pH, and reaction time of 90 min, quinoline and COD removal efficiencies reached 87.2% and 84.7%, respectively. Further increases in current density or reaction time produced only limited additional improvement under the investigated conditions. Control experiments showed higher quinoline removal in the combined process than in either individual process. Kinetic analysis showed that quinoline degradation could be adequately described by an apparent pseudo-first-order model. HPLC and GC-MS analyses indicated a proposed transformation pathway involving hydroxylation and quinolinone formation, followed by cleavage of the aromatic and heterocyclic structures and subsequent oxidation to small-molecule organic acids. These results provide an integrated evaluation of quinoline removal, COD reduction, kinetic behavior, and intermediate transformation, thereby providing a basis for further optimization of UV-electrochemical treatment of quinoline-containing wastewater.

Förderung

  • Fundamental Research Funds for the Central Universities
  • National Natural Science Foundation of China
  • Ordos Postdoctoral Research Fund

Zitieren

APA

Ning, K., Yang, H., Sun, X., Li, S., Cui, J., Ma, L., Deng, Y., Li, X., Huang, G., Huangfu, Z., Zhao, P., & Zhuo, Q. (2026). UV-Electrochemical Catalytic Oxidation of Quinoline-Containing Wastewater Using an IrO2-Based Anode: COD Reduction, Degradation Kinetics, and Transformation Pathway. ACS Omega. https://doi.org/10.1021/acsomega.6c08661

Vancouver

Ning K, Yang H, Sun X, Li S, Cui J, Ma L, et al. UV-Electrochemical Catalytic Oxidation of Quinoline-Containing Wastewater Using an IrO2-Based Anode: COD Reduction, Degradation Kinetics, and Transformation Pathway. ACS Omega. 2026. doi:10.1021/acsomega.6c08661

BibTeX
@article{Ning2026,
  author = {Ning, Kejia and Yang, Han and Sun, Xin and Li, Shan and Cui, Jiulong and Ma, Lin and Deng, Yanyan and Li, Xiaoke and Huang, Gen and Huangfu, Zechao and Zhao, Pengfei and Zhuo, Qiming},
  title = {UV-Electrochemical Catalytic Oxidation of Quinoline-Containing Wastewater Using an IrO2-Based Anode: COD Reduction, Degradation Kinetics, and Transformation Pathway},
  journal = {ACS Omega},
  year = {2026},
  doi = {10.1021/acsomega.6c08661}
}
Kostenlos starten →