Anodization of Aluminum in Moderate-to-High Concentrations of Sulfuric Acid
ACS Omega · 18.08.2026 · 11 (32) · 48707-48714
DOI: 10.1021/acsomega.6c07699 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Omega, online erschienen am 06.08.2026. Verfasst von Hidetaka Asoh und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Applied Chemistry, Kogakuin University, 2665-1 Nakano, Hachioji, Tokyo 192-0015, Japan. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Light Metal Educational Foundation.
Abstract (Originalsprache)
Sulfuric acid is widely used as an electrolyte for aluminum anodization in both industrial and academic applications. Industrial anodization typically employs sulfuric acid concentrations of 1–2.5 M, whereas academic studies, particularly those on the self-ordering of pore arrangements, often use low-concentration sulfuric acid (≤0.3 M). Although commercially available sulfuric acid (96–98%) has a concentration of approximately 18 M, the anodization behavior of aluminum in highly concentrated sulfuric acid (≥3 M) has received little attention. In this study, the effects of sulfuric acid concentration (1.5–12 M) on the voltage–time response during constant-current anodization, the structure of the resulting anodic film, and film formation efficiency were systematically investigated. The results showed that these properties exhibited nonmonotonic concentration dependence, with similar trends observed at both low and high sulfuric acid concentrations. This characteristic behavior was attributed to changes in the electrical conductivity of the electrolyte associated with the concentration-dependent dissociation of sulfuric acid. Furthermore, anodization in 12 M sulfuric acid resulted in increased sulfate incorporation into the anodic film, accompanied by increased film thickness and an apparent improvement in film formation efficiency.
Autor:innen und Institutionen
- Department of Applied Chemistry, Kogakuin University, 2665-1 Nakano, Hachioji, Tokyo 192-0015, Japan.
ORCID-Profile: Hidetaka Asoh
Förderung
- Light Metal Educational Foundation
Zitieren
APA
Asoh, H., Murata, Y., & Hagiwara, K. (2026). Anodization of Aluminum in Moderate-to-High Concentrations of Sulfuric Acid. ACS Omega, 11(32), 48707-48714. https://doi.org/10.1021/acsomega.6c07699
Vancouver
Asoh H, Murata Y, Hagiwara K. Anodization of Aluminum in Moderate-to-High Concentrations of Sulfuric Acid. ACS Omega. 2026;11(32):48707-48714. doi:10.1021/acsomega.6c07699
BibTeX
@article{Asoh2026,
author = {Asoh, Hidetaka and Murata, Yusuke and Hagiwara, Kenta},
title = {Anodization of Aluminum in Moderate-to-High Concentrations of Sulfuric Acid},
journal = {ACS Omega},
year = {2026},
volume = {11},
number = {32},
pages = {48707--48714},
doi = {10.1021/acsomega.6c07699}
}
EUVIMED