Study on Corrosion and Scaling Risks and Prevention/Control Measures of Water Injection Systems in Middle East Oilfields
ACS Omega · 19.11.2026
DOI: 10.1021/acsomega.6c07436 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Omega, online erschienen am 19.11.2026. Verfasst von Shuzhe Shi und 7 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: PetroChina.
Abstract (Originalsprache)
To address the severe scaling and corrosion challenges in water injection systems of high-salinity and acidic oilfields in the Middle East, a combined approach of laboratory experiments, software simulation, and machine learning was employed to systematically investigate the scaling characteristics, corrosion behavior, and performance of corrosion inhibitors. CaSO4, CaCO3, and SrSO4 were identified as the dominant scale types. The effects of temperature, calcium ion concentration, CO2 partial pressure, and chloride ion concentration on scaling and corrosion were elucidated, and a high-accuracy machine-learning scale-prediction model was established. It achieves favorable prediction performance for three scale types (CaCO3, CaSO4, and SrSO4) on the test set, with coefficients of determination R2 all no less than 0.93, which enables rapid on-site scale-formation risk identification. The mechanism by which elevated calcium ion concentration aggravates localized corrosion was clarified. When the scale layer is incomplete, an increase in Ca2+ causes uneven distribution of the scale layer and the formation of microgalvanic couples, accelerating the initiation and propagation of localized corrosion. For example, the localized corrosion rate of L80 steel can reach 2.555 mm/y when the concentration of Ca2+ is 20000 mg/L. The multiscale inhibition mechanism of an imidazoline quaternary ammonium salt corrosion inhibitor was explored, and a prevention-control strategy combining water quality ion regulation and corrosion inhibitor injection was proposed. Controlling the Ca2+ content in water below 6000 mg/L and SO2–4 content below 1000 mg/L can effectively reduce the scaling risk of CaSO4. Injecting 100 ppm of No.3 corrosion inhibitor can realize both scale control and localized corrosion suppression, with a corrosion inhibition efficiency of over 94%. The research outcomes can directly guide the mitigation of scaling and corrosion in water injection systems of high-salinity and acidic oilfields in the Middle East, with expected reductions in pipeline perforation accidents and significant extensions of equipment service life.
Förderung
- PetroChina
Zitieren
APA
Shi, S., Zhang, Y., Wang, J., Wu, B., Wen, N., Nie, Z., Huang, X., & Wang, X. (2026). Study on Corrosion and Scaling Risks and Prevention/Control Measures of Water Injection Systems in Middle East Oilfields. ACS Omega. https://doi.org/10.1021/acsomega.6c07436
Vancouver
Shi S, Zhang Y, Wang J, Wu B, Wen N, Nie Z, et al. Study on Corrosion and Scaling Risks and Prevention/Control Measures of Water Injection Systems in Middle East Oilfields. ACS Omega. 2026. doi:10.1021/acsomega.6c07436
BibTeX
@article{Shi2026,
author = {Shi, Shuzhe and Zhang, Yanna and Wang, Jincai and Wu, Bohong and Wen, Ninghua and Nie, Zhen and Huang, Xueqin and Wang, Xiuyun},
title = {Study on Corrosion and Scaling Risks and Prevention/Control Measures of Water Injection Systems in Middle East Oilfields},
journal = {ACS Omega},
year = {2026},
doi = {10.1021/acsomega.6c07436}
}
EUVIMED