EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Defect-Engineered Al- and Nd-Doped WO3 Films for Enhanced Carbon Monoxide Sensing via Oxygen Vacancy Modulation

María Josefina Robles-Aguila, Marino Conde Guevara, Venkata Krishna Karthik Tangirala, Antonio Méndez-Blas, Nicolás Rutilo Silva-González, Ricardo Lozano-Rosas

ACS Omega · 09.11.2026

DOI: 10.1021/acsomega.6c06531 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 09.11.2026. Verfasst von María Josefina Robles-Aguila und 5 weiteren Autor:innen. Die Arbeit nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Secretar?a de Ciencia, Humanidades, Tecnolog?a e Innovaci?n.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Carbon monoxide (CO) is a highly toxic, colorless, and odorless gas that poses a serious risk to human health, making its reliable detection essential for environmental monitoring and industrial safety. In this work, defect-engineered WO3 films, pure, single-doped, and codoped with Al3+ and Nd3+ were developed to enhance CO sensing at an operating temperature of 200 °C. Synergistic defect engineering was achieved through simultaneous Al and Nd codoping, which enables controlled modulation of oxygen vacancies, charge transport, and surface reactivity. The materials were synthesized via a coprecipitation-assisted ultrasonic method and deposited as films using the Doctor Blade technique. structural, optical, morphological, and electrical characterizations (X-ray diffraction (XRD), Raman, UV–Vis, PL, Scanning electron microscopy (SEM), AFM, and electrical measurements) revealed that Al3+ doping promotes lattice distortion and increased defect density, particularly oxygen vacancies, while Nd3+ induces improved crystallinity and structural relaxation. Gas sensing measurements indicated that all WO3-based sensors responded to CO. Pure WO3 exhibited the highest response (47.37%), followed by WO3–Al (26.31%), WO3–Nd (15.10%), and WO3–AlNd (14.56%) at 200 °C. Notably, all doped WO3 sensors exhibited higher CO responses than the commercial MQ-135 sensor (5.95%) under the same experimental conditions. Among the doped materials, WO3–Al exhibited the superior response, whereas WO3–AlNd showed a balanced combination of response and recovery characteristics, which may be associated with the combined effects of defect modulation and charge transport. Compared with pure WO3, the doped WO3 sensors exhibited faster sensing dynamics, with response and recovery times: 73–31, 27–44, 35–44, and 28–40, respectively. These results highlight the potential of doped WO3 sensors as promising materials for CO sensing applications.

Förderung

  • Secretar?a de Ciencia, Humanidades, Tecnolog?a e Innovaci?n

Zitieren

APA

Robles-Aguila, M. J., Guevara, M. C., Tangirala, V. K. K., Méndez-Blas, A., Silva-González, N. R., & Lozano-Rosas, R. (2026). Defect-Engineered Al- and Nd-Doped WO3 Films for Enhanced Carbon Monoxide Sensing via Oxygen Vacancy Modulation. ACS Omega. https://doi.org/10.1021/acsomega.6c06531

Vancouver

Robles-Aguila MJ, Guevara MC, Tangirala VKK, Méndez-Blas A, Silva-González NR, Lozano-Rosas R. Defect-Engineered Al- and Nd-Doped WO3 Films for Enhanced Carbon Monoxide Sensing via Oxygen Vacancy Modulation. ACS Omega. 2026. doi:10.1021/acsomega.6c06531

BibTeX
@article{RoblesAguila2026,
  author = {Robles-Aguila, María Josefina and Guevara, Marino Conde and Tangirala, Venkata Krishna Karthik and Méndez-Blas, Antonio and Silva-González, Nicolás Rutilo and Lozano-Rosas, Ricardo},
  title = {Defect-Engineered Al- and Nd-Doped WO3 Films for Enhanced Carbon Monoxide Sensing via Oxygen Vacancy Modulation},
  journal = {ACS Omega},
  year = {2026},
  doi = {10.1021/acsomega.6c06531}
}
Kostenlos starten →