EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Reusable Fully Sputtered Architecture for Semitransparent Perovskite Solar Cells Integrating CsPbI3

Salvatore Valastro, Gaetano Calogero, Salvatore La Manna, Vanna Torrisi, Vincenzina Strano, Emanuele Smecca, Giovanni Mannino, Carlo Spampinato, Paola La Magna, Corrado Bongiorno, Valentina Arena, Giorgia Franzò und 3 weitere

ACS Omega · 10.11.2026

DOI: 10.1021/acsomega.6c05855 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 10.11.2026. Verfasst von Salvatore Valastro und 14 weiteren Autor:innen. Die Arbeit nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NextGenerationEU, Ministero dell'ambiente e della sicurezza energetica, National Projects BEYOND NANO Upgrade.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Semitransparency is essential for applications in agrivoltaics and building-integrated photovoltaics. Here, semitransparent perovskite solar cells (PSC) are developed using high-vacuum sputtering deposition of advanced oxide layers. The bottom electrode is a Gig-Lox TiO2 multibranched sponge deposited on commercial c-TiO2/FTO by reactive sputtering. This sponge is then infiltrated with δ-CsPbI3, which remains mostly embedded into the TiO2 scaffold during the subsequent deposition steps. On top of this stack, a transparent 7 nm MoOx buffer layer is deposited at low power density in pure Ar from a MoO3 target, followed by the deposition of a 90 nm-thick ITO layer by reactive sputtering in Ar–O2. The resulting device can be described as an HTL-free-like architecture, where the ultrathin MoOx layer enables hole transfer into ITO via defect-assisted tunneling. The perovskite, initially in the nonphotoactive δ-phase, is converted into the photoactive γ-phase upon annealing the full FTO/c-TiO2/Gig-Lox TiO2/CsPbI3/MoOx/ITO stack at 350 °C. Full device annealing is enabled by the inorganic nature of the entire stack, and reannealing is also feasible at the same temperature for reuse. Simulations and experiments suggest that an interplay between the Gig-Lox TiO2 thickness and the MoOx interlayer modulates both transmittance and PSC efficiency by tuning the CsPbI3 Fermi level and the CsPbI3/MoOx interface dipole. The proposed reusable, fully sputtered semitransparent PSC architecture integrating CsPbI3 opens applicative perspectives in building-integrated photovoltaics and agrivoltaics.

Förderung

  • NextGenerationEU
  • Ministero dell'ambiente e della sicurezza energetica
  • National Projects BEYOND NANO Upgrade

Zitieren

APA

Valastro, S., Calogero, G., Manna, S. L., Torrisi, V., Strano, V., Smecca, E., Mannino, G., Spampinato, C., Magna, P. L., Bongiorno, C., Arena, V., Franzò, G., Magna, A. L., Miritello, M., & Alberti, A. (2026). Reusable Fully Sputtered Architecture for Semitransparent Perovskite Solar Cells Integrating CsPbI3. ACS Omega. https://doi.org/10.1021/acsomega.6c05855

Vancouver

Valastro S, Calogero G, Manna SL, Torrisi V, Strano V, Smecca E, et al. Reusable Fully Sputtered Architecture for Semitransparent Perovskite Solar Cells Integrating CsPbI3. ACS Omega. 2026. doi:10.1021/acsomega.6c05855

BibTeX
@article{Valastro2026,
  author = {Valastro, Salvatore and Calogero, Gaetano and Manna, Salvatore La and Torrisi, Vanna and Strano, Vincenzina and Smecca, Emanuele and Mannino, Giovanni and Spampinato, Carlo and Magna, Paola La and Bongiorno, Corrado and Arena, Valentina and Franzò, Giorgia and Magna, Antonino La and Miritello, Maria and Alberti, Alessandra},
  title = {Reusable Fully Sputtered Architecture for Semitransparent Perovskite Solar Cells Integrating CsPbI3},
  journal = {ACS Omega},
  year = {2026},
  doi = {10.1021/acsomega.6c05855}
}
Kostenlos starten →