Boosting CO2 Foam Flooding Performance with Tailored CO2-Soluble Fluorinated Surfactants AC18xHFPODA/TA
ACS Omega · 12.11.2026
DOI: 10.1021/acsomega.6c05678 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Omega, online erschienen am 12.11.2026. Verfasst von Xinyuan Zou und 5 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: PetroChina, National Science and Technology Major Project.
Abstract (Originalsprache)
CO2 foams generated with water-soluble surfactants are often limited by substantial adsorption losses, poor long-distance transport, and insufficient foam generation in deep reservoir regions. Herein, a series of CO2-soluble fluorinated surfactants, denoted as AC18xHFPODA/TA (where AC = C18 alkyl chain, x = EO chain length, HFPO = hexafluoropropylene oxide oligomer, and DA/TA denote the HFPO dimer and trimer segments, respectively), were synthesized by grafting short-chain fluorinated ether segments derived from hexafluoropropylene oxide oligomers onto an alkylamine polyoxyethylene ether backbone through a molecular hybridization strategy. The chemical structures of the synthesized products were determined by FT-IR, 1H NMR, and 19F NMR spectra. The effects of fluorinated-chain, polyoxyethylene-chain, and alkyl-chain lengths on foaming performance were then systematically evaluated to clarify the relationship between molecular structure and foam-regulating properties. The results showed that incorporation of the fluorinated segments significantly improved CO2 solubility and interfacial activity, while also enhancing adsorption and interfacial stabilization at the CO2/water interface. Among the synthesized surfactants, AC1815HFPODA exhibited the best overall performance, with the critical micelle concentration of 0.158 mmol/L and the corresponding surface tension of 28.68 mN/m (at 25 °C), and the cloud-point pressure of 26.75 MPa with concentration of 2.5 wt % at 50 °C. Core flooding experiments further demonstrated that AC1815HFPODA could comigrate with the CO2 phase and generate stable foams in-situ upon contacting the aqueous phase, increasing the resistance factor to 31.86 and substantially improving CO2 mobility control. The generated foam mitigated gas channeling along preferential flow paths by increasing the apparent viscosity of the gas phase and strengthening the Jamin effect within pore throats, thereby improving the potential of foam-based strategies for deep-reservoir mobility control. These findings provide a solid experimental basis for the molecular design of CO2-soluble fluorinated surfactants and support their potential application in CO2 foam flooding.
Förderung
- PetroChina
- National Science and Technology Major Project
Zitieren
APA
Zou, X., Chang, Z., Zhang, Q., Li, X., Xu, A., & Luo, W. (2026). Boosting CO2 Foam Flooding Performance with Tailored CO2-Soluble Fluorinated Surfactants AC18xHFPODA/TA. ACS Omega. https://doi.org/10.1021/acsomega.6c05678
Vancouver
Zou X, Chang Z, Zhang Q, Li X, Xu A, Luo W. Boosting CO2 Foam Flooding Performance with Tailored CO2-Soluble Fluorinated Surfactants AC18xHFPODA/TA. ACS Omega. 2026. doi:10.1021/acsomega.6c05678
BibTeX
@article{Zou2026,
author = {Zou, Xinyuan and Chang, Zhidong and Zhang, Qun and Li, Xuan and Xu, Anhou and Luo, Wenli},
title = {Boosting CO2 Foam Flooding Performance with Tailored CO2-Soluble Fluorinated Surfactants AC18xHFPODA/TA},
journal = {ACS Omega},
year = {2026},
doi = {10.1021/acsomega.6c05678}
}
EUVIMED