Non-Coalesced ZIF-8 MOF-Derived Hierarchical Porous Carbon Nanofibers for Energy Storage Applications
ACS Omega · 22.09.2026 · 11 (37) · 55727-55738
DOI: 10.1021/acsomega.6c05089 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Omega, online erschienen am 11.09.2026. Verfasst von Sivasri Babu und 1 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Nanotechnology Research, Vellore Institute of Technology, Vellore 632 014, India. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Science and Engineering Research Board, Department of Science and Technology, Ministry of Science and Technology, India.
Abstract (Originalsprache)
The development of a nitrogen-doped carbon nanofiber-incorporated 3D MOF structure as an electrode for an energy storage device has attracted significant attention for advanced electrochemical performance due to its high energy and power density. Herein, ZIF-8 was deliberately grown in situ on PAN/PVP nanofiber using an electrospinning technique to attain a hierarchically porous architecture. The integration of ZIF-8 templates and the thermal decomposition of PVP created a network of interconnected micropores and mesopores, yielding a Brunauer–Emmett–Teller (BET) specific surface area of 373.18 m2 g–1 and a maximum pore volume of 0.28 cm2 g–1. X-ray photoelectron spectroscopy (XPS) confirmed successful nitrogen doping, which significantly enhanced pseudocapacitive behavior, surface wettability, and charge-transfer kinetics in an acidic medium. The dominant surface-controlled capacitive storage mechanism (65–94%) makes the C-ZNF electrode exhibit a high specific capacitance of 278 F g–1 at 1 A g–1 in 1 M H2SO4. This unique architecture facilitates effective ion transport pathways and improves the charge storage mechanism by reducing internal resistance at the electrode–electrolyte interface. Furthermore, the symmetric coin cell-assembled device exhibits higher power density and energy density of 1000 W kg–1 and 34 Wh kg–1, respectively. The device exhibited a maximum specific capacitance of 340 F g–1 at a current density of 0.3 A g–1 (C-ZNF // C-ZNF). The device retained 84% of its initial capacitance after 5000 charge–discharge cycles. These findings demonstrate the potential of ZIF-8-derived carbon nanofiber as a promising electrode material for high-performance supercapacitors.
Autor:innen und Institutionen
- Centre for Nanotechnology Research, Vellore Institute of Technology, Vellore 632 014, India.
ORCID-Profile: Andrews Nirmala Grace
Förderung
- Science and Engineering Research Board
- Department of Science and Technology, Ministry of Science and Technology, India
Zitieren
APA
Babu, S., & Grace, A. N. (2026). Non-Coalesced ZIF-8 MOF-Derived Hierarchical Porous Carbon Nanofibers for Energy Storage Applications. ACS Omega, 11(37), 55727-55738. https://doi.org/10.1021/acsomega.6c05089
Vancouver
Babu S, Grace AN. Non-Coalesced ZIF-8 MOF-Derived Hierarchical Porous Carbon Nanofibers for Energy Storage Applications. ACS Omega. 2026;11(37):55727-55738. doi:10.1021/acsomega.6c05089
BibTeX
@article{Babu2026,
author = {Babu, Sivasri and Grace, Andrews Nirmala},
title = {Non-Coalesced ZIF-8 MOF-Derived Hierarchical Porous Carbon Nanofibers for Energy Storage Applications},
journal = {ACS Omega},
year = {2026},
volume = {11},
number = {37},
pages = {55727--55738},
doi = {10.1021/acsomega.6c05089}
}
EUVIMED