Performance and Emission Characteristics of Apricot Kernel Oil Methyl Ester–Diesel Blends in a Compression Ignition Engine: RSM-Based Multi-Criteria Optimization across Engine Speed Regimes
ACS Omega · 12.11.2026
DOI: 10.1021/acsomega.6c04837 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Omega, online erschienen am 12.11.2026. Verfasst von Melih Utku Abanoz und 5 weiteren Autor:innen. Die Arbeit nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: ?ukurova ?niversitesi, Atat?rk ?niversitesi.
Abstract (Originalsprache)
In this study, biodiesel (AKOME) produced from apricot kernel oil through the transesterification method was blended with diesel fuel in volumetric ratios of 5%, 10%, 15%, and 20% (B5, B10, B15, B20). In a single-cylinder, four-stroke, air-cooled compression ignition (CI) engine, under full load conditions, experiments were conducted at four different engine speeds (1000, 1500, 2000, and 2500 rpm) to measure engine performance parameters (BTE, Torque, Brake Power, BSFC) and exhaust emissions (CO, NO, NOx, HC, EGT). Based on 60 experimental observations (3 repetitions × 4 speeds × 5 blends), the Response Surface Methodology (RSM) models exhibited high prediction accuracy, ranging from R2 = 0.890 (CO) to R2 = 0.976 (BSFC). Sufficient Precision values remained well above the recommended minimum threshold of 4.0 for all response variables (34.98–67.96). The multicriteria optimization conducted using the weighted desirability function (CO × 3, HC × 3, NOx × 2, BTE × 1, BSFC × 1) revealed an optimal blending strategy dependent on engine speed. At 1000 rpm, B20 provided the highest global desirability (D = 0.340), reducing CO by 33.6% and HC by 30.7%, while only increasing BSFC by 4.6%. In the 1500–2000 rpm range, while D100 maintained its marginal superiority, the difference with the closest biodiesel blend remained ΔD < 0.06, indicating practical interchangeability. At high engine speeds of 2500 rpm, D100 was preferred due to the increase in HC caused by the viscosity of biodiesel. B20, across all tested speeds, provided an average CO reduction of 24.1% compared to D100, with the highest reduction measured at 50.1% at 2500 rpm. The obtained results demonstrate that AKOME-diesel mixtures can be directly used in engines without any construction modifications. Additionally, these findings provide a comprehensive biodiesel evaluation framework that enables the development of optimized fuel strategies based on engine operating conditions.
Förderung
- ?ukurova ?niversitesi
- Atat?rk ?niversitesi
Zitieren
APA
Abanoz, M. U., Güngör, C., Özdi̇l, N. F. T., Arpa, O., Yeşi̇lyurt, M. K., & Öner, I. V. (2026). Performance and Emission Characteristics of Apricot Kernel Oil Methyl Ester–Diesel Blends in a Compression Ignition Engine: RSM-Based Multi-Criteria Optimization across Engine Speed Regimes. ACS Omega. https://doi.org/10.1021/acsomega.6c04837
Vancouver
Abanoz MU, Güngör C, Özdi̇l NFT, Arpa O, Yeşi̇lyurt MK, Öner IV. Performance and Emission Characteristics of Apricot Kernel Oil Methyl Ester–Diesel Blends in a Compression Ignition Engine: RSM-Based Multi-Criteria Optimization across Engine Speed Regimes. ACS Omega. 2026. doi:10.1021/acsomega.6c04837
BibTeX
@article{Abanoz2026,
author = {Abanoz, Melih Utku and Güngör, Ceyla and Özdi̇l, Naime Filiz Tümen and Arpa, Orhan and Yeşi̇lyurt, Muhammet Kaan and Öner, İlhan Volkan},
title = {Performance and Emission Characteristics of Apricot Kernel Oil Methyl Ester–Diesel Blends in a Compression Ignition Engine: RSM-Based Multi-Criteria Optimization across Engine Speed Regimes},
journal = {ACS Omega},
year = {2026},
doi = {10.1021/acsomega.6c04837}
}
EUVIMED