EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Engineered 3D-Printed Poly(lactic acid) and Acrylonitrile Butadiene Styrene (ABS) Membranes’ Caster for Preparation of Chitosan-Based Liquid Membranes: A Short Communication

Ahmad Fikri Adam, Ayo Olasupo, Matthew Y Lui iD, Kumar Sudesh iD, Faiz Bukhari Mohd Suah iD

ACS Omega · 28.07.2026 · 11 (29) · 44294-44300

DOI: 10.1021/acsomega.6c04590 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 15.07.2026. Verfasst von Ahmad Fikri Adam und 4 weiteren Autor:innen. Beteiligte Einrichtung: Green Analytical Chemistry Laboratory, School of Chemical Sciences, Universiti Sains Malaysia, 11800 Minden, Pulau Pinang, Malaysia. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Chitosan membranes have attracted growing interest for separation and sensing applications owing to their biodegradability, chemical functionality, and film-forming ability. However, strong adhesion to the casting surface makes conventional Petri dish fabrication challenging. In this study, a three-dimensional (3D) membrane caster was fabricated via fused deposition modeling (FDM) with a removable Teflon base sheet, enabling reliable casting and easy detachment of membranes. The caster is reusable, customizable in size and geometry, and compatible with both of the conventional filaments, polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS) filaments, without interfering with membrane integrity. Characterization by fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and EDX confirmed comparable results between membranes cast on the 3D caster and a conventional glass Petri dish. Water uptake (∼93–94%) and thickness distribution (∼35–43 μm) were consistent across all casting platforms, indicating negligible differences in swelling behavior and uniformity. This scalable approach is readily adaptable to other membrane types and offers a practical fabrication model for liquid membranes (LMs) and polymer inclusion membranes (PIMs) in future separation systems.

Autor:innen und Institutionen

  • Green Analytical Chemistry Laboratory, School of Chemical Sciences, Universiti Sains Malaysia, 11800 Minden, Pulau Pinang, Malaysia.
  • Wonderful Institute for Sustainable Engineering, Chemical and Petroleum Engineering, University of Kansas, 1530, W. 15th Street, Lawrence, Kansas 66045, United States.
  • Department of Chemistry, Hong Kong Baptist University, Waterloo Road, Kowloon Tong, Kowloon, HKSAR 999077, P. R. China.
  • Ecobiomaterial Laboratory, School of Biological Sciences, Universiti Sains Malaysia, 11800 Minden, Pulau Pinang Malaysia.

ORCID-Profile: Matthew Y Lui, Kumar Sudesh, Faiz Bukhari Mohd Suah

Zitieren

APA

Adam, A. F., Olasupo, A., Lui, M. Y., Sudesh, K., & Suah, F. B. M. (2026). Engineered 3D-Printed Poly(lactic acid) and Acrylonitrile Butadiene Styrene (ABS) Membranes’ Caster for Preparation of Chitosan-Based Liquid Membranes: A Short Communication. ACS Omega, 11(29), 44294-44300. https://doi.org/10.1021/acsomega.6c04590

Vancouver

Adam AF, Olasupo A, Lui MY, Sudesh K, Suah FBM. Engineered 3D-Printed Poly(lactic acid) and Acrylonitrile Butadiene Styrene (ABS) Membranes’ Caster for Preparation of Chitosan-Based Liquid Membranes: A Short Communication. ACS Omega. 2026;11(29):44294-44300. doi:10.1021/acsomega.6c04590

BibTeX
@article{Adam2026,
  author = {Adam, Ahmad Fikri and Olasupo, Ayo and Lui, Matthew Y and Sudesh, Kumar and Suah, Faiz Bukhari Mohd},
  title = {Engineered 3D-Printed Poly(lactic acid) and Acrylonitrile Butadiene Styrene (ABS) Membranes’ Caster for Preparation of Chitosan-Based Liquid Membranes: A Short Communication},
  journal = {ACS Omega},
  year = {2026},
  volume = {11},
  number = {29},
  pages = {44294--44300},
  doi = {10.1021/acsomega.6c04590}
}
Kostenlos starten →