Optimization of Base-Catalyzed Transesterification toward Maximum Biodiesel Yield from Camelus dromedarius Fat Waste
ACS Omega · 10.11.2026 · 11 (44) · 68304-68320
DOI: 10.1021/acsomega.6c03814 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Omega, online erschienen am 29.10.2026. Verfasst von Sami Alsaadi und 5 weiteren Autor:innen. Beteiligte Einrichtung: Environmental Technology Division, School of Industrial Technology, Universiti Sains Malaysia, Gelugor, Penang 11800, Malaysia. Die Arbeit nennt 89 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universiti Sains Malaysia.
Abstract (Originalsprache)
Utilization of organic waste offers a promising pathway to advance the circular bioeconomy and address global energy challenges through sustainable biodiesel production. Camelus dromedarius fat waste, abundant in arid and semiarid regions, remains an underexploited byproduct with considerable potential as a renewable biodiesel feedstock, reducing dependence on conventional resources. Despite significant progress in biodiesel research, studies on the transesterification of Camelus dromedarius fat waste are limited, and comprehensive optimization of its reaction parameters is lacking. This study evaluated biodiesel production from camel fat waste oil through alkali-catalyzed transesterification and optimized the process using Response Surface Methodology (RSM) based on a Central Composite Design (CCD). For the optimization stage, catalyst concentration (0.25–1.25 wt %), reaction temperature (45–85 °C), reaction time (15–55 min), and oil-to-methanol molar ratio (1:3–1:15) were selected as independent variables to investigate their individual and interactive effects on biodiesel yield. The RSM model predicted a maximum biodiesel yield of 95% under optimal conditions of 68 °C reaction temperature, 0.8 wt % catalyst concentration, 36 min reaction time, and an oil-to-methanol molar ratio of 1:9.6. Validation experiments confirmed the model prediction with an average yield of 94.82% and a relative error of only 0.19%. The produced biodiesel was characterized by FTIR, GC-FID, and physicochemical properties. The fuel properties were largely consistent with ASTM D6751 specifications, while viscosity slightly exceeded the EN 14214 limit and cold-flow properties indicated limited suitability for low-temperature applications. This underscores the potential of discarded camel fat as a sustainable feedstock and demonstrating that optimized transesterification enhances resource efficiency and advances biodiesel technologies within a circular bioeconomy framework.
Autor:innen und Institutionen
- Environmental Technology Division, School of Industrial Technology, Universiti Sains Malaysia, Gelugor, Penang 11800, Malaysia.
- Biology Department, College of Science, University of Hail, Hail 81422, Saudi Arabia.
- Renewable Biomass Transformation Cluster, School of Industrial Technology, Universiti Sains Malaysia, Gelugor, Penang 11800, Malaysia.
- Faculty of Environmental Science and Marine Biology, Hadhramout University, Mukalla, Hahdramout 50512, Yemen.
ORCID-Profile: Mardiana Idayu Ahmad, Mohammad Aliff Shakir
Förderung
- Universiti Sains Malaysia
Zitieren
APA
Alsaadi, S., Ahmad, M. I., Binhweel, F., Senusi, W., Shalfoh, E., & Shakir, M. A. (2026). Optimization of Base-Catalyzed Transesterification toward Maximum Biodiesel Yield from Camelus dromedarius Fat Waste. ACS Omega, 11(44), 68304-68320. https://doi.org/10.1021/acsomega.6c03814
Vancouver
Alsaadi S, Ahmad MI, Binhweel F, Senusi W, Shalfoh E, Shakir MA. Optimization of Base-Catalyzed Transesterification toward Maximum Biodiesel Yield from Camelus dromedarius Fat Waste. ACS Omega. 2026;11(44):68304-68320. doi:10.1021/acsomega.6c03814
BibTeX
@article{Alsaadi2026,
author = {Alsaadi, Sami and Ahmad, Mardiana Idayu and Binhweel, Fozy and Senusi, Wardah and Shalfoh, Ehsan and Shakir, Mohammad Aliff},
title = {Optimization of Base-Catalyzed Transesterification toward Maximum Biodiesel Yield from Camelus dromedarius Fat Waste},
journal = {ACS Omega},
year = {2026},
volume = {11},
number = {44},
pages = {68304--68320},
doi = {10.1021/acsomega.6c03814}
}
EUVIMED