Data-Driven Spectral Prediction of Black Dyeing in Recycled Polymer Microfibers via Multi-Output Regression
ACS Omega · 21.07.2026 · 11 (28) · 42557-42570
DOI: 10.1021/acsomega.6c03679 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Omega, online erschienen am 09.07.2026. Verfasst von Hyeokjun Cho und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, Republic of Korea. Die Arbeit nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Research Foundation of Korea, Korea Evaluation Institute of Industrial Technology.
Abstract (Originalsprache)
High Resolution Image Download MS PowerPoint Slide This study presents a spectrum-based data-driven modeling framework for predicting the wavelength-dependent K/S spectrum from dye recipes in the dyeing process of black dope-dyed recycled microfiber fabrics. Instead of relying only on scalar color coordinates, the proposed framework directly predicts the K/S spectrum over the 400–700 nm range. This enables a more direct interpretation of color reproducibility while preserving the physical basis of color formation. Using samples dyed with combinations of yellow, red, and blue dyes, the problem was formulated as a multi-output regression task in which the K/S value at each wavelength was treated as an output. Because black-shade data are characterized by high inter-wavelength correlation and limited spectral variation, eight regression models were systematically compared under these constrained conditions, and partial least-squares regression (PLSR) was selected as the final model. The selected model showed high agreement between the predicted and measured K/S spectra. When the predicted spectra were converted into CIELAB coordinates, the mean color difference between predicted and measured colors was 0.79 in terms of Δ E a b *, indicating a high level of color reproducibility. These results show that the proposed framework can effectively model black-shade dyeing data with a limited number of samples while maintaining both spectral agreement and perceptual accuracy. The framework provides practical support for data-driven dye recipe design and quality validation and may contribute to improved color control, process efficiency, and reproducibility in polymer-based microfiber dyeing processes.
Autor:innen und Institutionen
- Department of Materials Science and Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, Republic of Korea.
- Graduate School of Semiconductor Materials and Devices Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, Republic of Korea.
ORCID-Profile: Seung Geol Lee
Förderung
- National Research Foundation of Korea
- Korea Evaluation Institute of Industrial Technology
Zitieren
APA
Cho, H., & Lee, S. G. (2026). Data-Driven Spectral Prediction of Black Dyeing in Recycled Polymer Microfibers via Multi-Output Regression. ACS Omega, 11(28), 42557-42570. https://doi.org/10.1021/acsomega.6c03679
Vancouver
Cho H, Lee SG. Data-Driven Spectral Prediction of Black Dyeing in Recycled Polymer Microfibers via Multi-Output Regression. ACS Omega. 2026;11(28):42557-42570. doi:10.1021/acsomega.6c03679
BibTeX
@article{Cho2026,
author = {Cho, Hyeokjun and Lee, Seung Geol},
title = {Data-Driven Spectral Prediction of Black Dyeing in Recycled Polymer Microfibers via Multi-Output Regression},
journal = {ACS Omega},
year = {2026},
volume = {11},
number = {28},
pages = {42557--42570},
doi = {10.1021/acsomega.6c03679}
}
EUVIMED