EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Production of Biocomposites Based on Biodegradable Resin, Cellulose, and Lignin Using a Statistical Approach

Walber A Freitas iD, Rodrigo A Moreira iD, João P F Amaral, Rodrigo C B Batista, Werner Timans, Rudy Folkersma iD, Katja Loos iD, José M E de Matos iD

ACS Omega · 21.07.2026 · 11 (28) · 42263-42274

DOI: 10.1021/acsomega.6c02743 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 02.07.2026. Verfasst von Walber A Freitas und 7 weiteren Autor:innen. Beteiligte Einrichtung: Interdisciplinary Laboratory of Advanced Materials (LIMAV), Universidade Federal do Piaui, Ministro Petrônio Portella University Campus, Av. Universi…. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Rijksuniversiteit Groningen, Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work proposes the use of lignin and cellulose as fillers in the production of composites based on the resin Plantics-GX, a biopolymer commercialized by Plantics B.V., which serves as a sustainable alternative to conventional plastics as it is derived from renewable sources. In the context of the growing demand for environmentally friendly materials, the development of biobased composites represents a key step toward sustainable engineering solutions. A statistical mixture design of experiments was applied to ensure reliable modeling of the formulation and to optimize the component proportions to maximize the composite's mechanical performance. The tests reported in this paper showed that adding fillers to the Plantics resin increases the mechanical properties of the composite, making it mechanically stronger and more thermally stable, allowing it to be used more securely across a broader range of applications.

Autor:innen und Institutionen

  • Interdisciplinary Laboratory of Advanced Materials (LIMAV), Universidade Federal do Piaui, Ministro Petrônio Portella University Campus, Av. Universitária, S/NIninga, Teresina, Piauí 64049-550, Brazil.
  • Circular Plastics, Academy Tech & Design, NHL Stenden HogeschoolLocatie Emmen, Van Schaikweg 94, Emmen, Drenthe 7811 KL, Netherlands.
  • Macromolecular Chemistry and New Polymeric Materials, Zernike Institute for Advanced Materials, University of Groningen, Groningen, Groningen 9747 AG, Netherlands.

ORCID-Profile: Walber A Freitas, Rodrigo A Moreira, Rudy Folkersma, Katja Loos, José M E de Matos

Förderung

  • Rijksuniversiteit Groningen
  • Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior

Zitieren

APA

Freitas, W. A., Moreira, R. A., Amaral, J. P. F., Batista, R. C. B., Timans, W., Folkersma, R., Loos, K., & de Matos, J. M. E. (2026). Production of Biocomposites Based on Biodegradable Resin, Cellulose, and Lignin Using a Statistical Approach. ACS Omega, 11(28), 42263-42274. https://doi.org/10.1021/acsomega.6c02743

Vancouver

Freitas WA, Moreira RA, Amaral JPF, Batista RCB, Timans W, Folkersma R, et al. Production of Biocomposites Based on Biodegradable Resin, Cellulose, and Lignin Using a Statistical Approach. ACS Omega. 2026;11(28):42263-42274. doi:10.1021/acsomega.6c02743

BibTeX
@article{Freitas2026,
  author = {Freitas, Walber A and Moreira, Rodrigo A and Amaral, João P F and Batista, Rodrigo C B and Timans, Werner and Folkersma, Rudy and Loos, Katja and de Matos, José M E},
  title = {Production of Biocomposites Based on Biodegradable Resin, Cellulose, and Lignin Using a Statistical Approach},
  journal = {ACS Omega},
  year = {2026},
  volume = {11},
  number = {28},
  pages = {42263--42274},
  doi = {10.1021/acsomega.6c02743}
}
Kostenlos starten →