EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Ultrasonic Spray Deposition of Hydroxypropyl Methylcellulose Polymer Electrolyte Films

Chi-Ping Li iD, Guan-Xuan Chen

ACS Omega · 28.07.2026 · 11 (29) · 43694-43704

DOI: 10.1021/acsomega.6c02740 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 15.07.2026. Verfasst von Chi-Ping Li und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, National United University, No. 2, Lienda, Maioli 360302, Taiwan. Die Arbeit nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Gel polymer electrolytes were prepared using an ultrasonic spray deposition (USD) method in this study. The polymer matrix consisted of polyethylene glycol (PEG), with deionized water as the solvent and hydroxypropyl methylcellulose (HPMC) as the thickener. Lithium perchlorate (LiClO4) and lithium chloride (LiCl) were used as lithium salts. The effects of spray flow rate, number of coating layers, and lithium salt concentration on transmittance and ionic conductivity were investigated. Surface and cross-sectional morphology were observed using optical microscopy (OM) and scanning electron microscopy (SEM). The results showed that increasing the number of coating layers decreased transmittance due to light absorption by the electrolyte film and lithium salt. The higher lithium salt concentrations, the lower transmittance. Under controllable conditions, the transmittance of the electrolyte with LiClO4 exceeded 95%, higher than the typical value reported in the literature (approximately 80%). Ionic conductivity increased with increasing spray flow rate, number of coating layers, and lithium ion concentration. The highest ionic conductivity of the electrolyte with LiClO4 reached 3.56 × 10–5 S cm–1, which compares favorably with previously reported gel polymer electrolytes. These findings indicate that the gel polymer electrolytes developed in this work are qualified for applications in electrochromic device fields.

Autor:innen und Institutionen

  • Department of Chemical Engineering, National United University, No. 2, Lienda, Maioli 360302, Taiwan.

ORCID-Profile: Chi-Ping Li

Förderung

  • National Science and Technology Council

Zitieren

APA

Li, C. P., & Chen, G. X. (2026). Ultrasonic Spray Deposition of Hydroxypropyl Methylcellulose Polymer Electrolyte Films. ACS Omega, 11(29), 43694-43704. https://doi.org/10.1021/acsomega.6c02740

Vancouver

Li CP, Chen GX. Ultrasonic Spray Deposition of Hydroxypropyl Methylcellulose Polymer Electrolyte Films. ACS Omega. 2026;11(29):43694-43704. doi:10.1021/acsomega.6c02740

BibTeX
@article{Li2026,
  author = {Li, Chi-Ping and Chen, Guan-Xuan},
  title = {Ultrasonic Spray Deposition of Hydroxypropyl Methylcellulose Polymer Electrolyte Films},
  journal = {ACS Omega},
  year = {2026},
  volume = {11},
  number = {29},
  pages = {43694--43704},
  doi = {10.1021/acsomega.6c02740}
}
Kostenlos starten →