Biobased PEF/PLA Bilayer Electrospun Films with Enhanced Mechanical, Barrier, and UV-Protective Properties
ACS Omega · 30.06.2026 · 11 (25) · 38005-38016
DOI: 10.1021/acsomega.6c02615 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Omega, online erschienen am 15.06.2026. Verfasst von Rabia Zia und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Pharmacology & Therapeutics, College of Medicine and Health Sciences, United Arab Emirates University, Al Ain, PO Box 15551, United Ara…. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: United Arab Emirates University?Asian University Alliance (UAEU-AUA), ASPIRE, Abu Dhabi, United Arab Emirates.
Abstract (Originalsprache)
Poly-(lactic acid) (PLA) electrospun films are attractive for biomedical and packaging uses, but they are brittle and provide weak UV protection. Poly-(ethylene furanoate) (PEF) is biobased and offers excellent barrier properties but limited ductility. We fabricated PEF/PLA bilayer electrospun films in which curcumin-loaded PLA serves as the active top layer and PEF acts as a mechanically supportive, barrier, and photoprotective backing. Sequential electrospinning was adopted after identifying hexafluoro-2-propanol (HFIP) as a suitable PEF solvent that yields strong adhesion, whereas trifluoroacetic acid (TFA) produced unstable interfaces. Bilayers showed smaller, more uniform fibers, significant interfacial cohesion, and mechanical gains compared with a PLA monolayer, including higher tensile strength, elongation, and modulus. FTIR indicated no new covalent bonds on curcumin addition, consistent with mainly physical interactions. Increasing curcumin content lowered contact angle, tuned hydration, and modulated release: 1-2 wt % enabled slow, sustained delivery (∼20% at 9 h), whereas 3 wt % accelerated release (∼50% at 9 h) due to morphology-related effects. Water-vapor permeability was high initially but decreased markedly over 72 h as the fibrous network equilibrated. Orientation-dependent UV tests showed that the PEF layer effectively shielded the curcumin-loaded PLA from UV-A, while direct exposure of the PLA side caused measurable degradation. This structurally engineered, biobased bilayer couples mechanical reinforcement, barrier and UV-shielding with controllable payload release, supporting sustainable films for biomedical, food packaging, and other protective applications.
Autor:innen und Institutionen
- Department of Pharmacology & Therapeutics, College of Medicine and Health Sciences, United Arab Emirates University, Al Ain, PO Box 15551, United Arab Emirates.
- Department of Food Science, College of Agriculture and Veterinary Medicine, United Arab Emirates University, Al Ain, PO Box 15551, United Arab Emirates.
- Department of Chemical & Petroleum Engineering, College of Engineering, United Arab Emirates University, Al Ain, PO Box 15551, United Arab Emirates.
ORCID-Profile: Juraij Kandiyil, Akmal Nazir, Muhammad Z Iqbal
Förderung
- United Arab Emirates University?Asian University Alliance (UAEU-AUA)
- ASPIRE, Abu Dhabi, United Arab Emirates
Zitieren
APA
Zia, R., Phasaludeen, B., Niroula, A., Kandiyil, J., Rabbani, A., Aburuz, S., Nazir, A., & Iqbal, M. Z. (2026). Biobased PEF/PLA Bilayer Electrospun Films with Enhanced Mechanical, Barrier, and UV-Protective Properties. ACS Omega, 11(25), 38005-38016. https://doi.org/10.1021/acsomega.6c02615
Vancouver
Zia R, Phasaludeen B, Niroula A, Kandiyil J, Rabbani A, Aburuz S, et al. Biobased PEF/PLA Bilayer Electrospun Films with Enhanced Mechanical, Barrier, and UV-Protective Properties. ACS Omega. 2026;11(25):38005-38016. doi:10.1021/acsomega.6c02615
BibTeX
@article{Zia2026,
author = {Zia, Rabia and Phasaludeen, Bismi and Niroula, Anuj and Kandiyil, Juraij and Rabbani, Ahmad and Aburuz, Salahdein and Nazir, Akmal and Iqbal, Muhammad Z},
title = {Biobased PEF/PLA Bilayer Electrospun Films with Enhanced Mechanical, Barrier, and UV-Protective Properties},
journal = {ACS Omega},
year = {2026},
volume = {11},
number = {25},
pages = {38005--38016},
doi = {10.1021/acsomega.6c02615}
}
EUVIMED