EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of Hydrothermal Acid Activation of Coir Fibers: Enhancing Cellulose Yield and Cationic Dye Removal

Bosco Barnabas Mtweve, Muthumuni Managa, Tlou Nathaniel Moja, Mukuna Patrick Mubiayi

ACS Omega · 18.11.2026

DOI: 10.1021/acsomega.6c02595 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 18.11.2026. Verfasst von Bosco Barnabas Mtweve und 3 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Institute for Nanotechnology and Water Sustainability, University of South Africa, University of South Africa.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of sustainable biosorbents from lignocellulosic biomass is often limited by low yield and the energy-intensive fractionation required to enhance specific components and tailor their physicochemical properties for industrial scalability. To address this, an I-optimal response surface methodology (RSM) optimization approach was used to optimize the parameters of the acid-assisted hydrothermal activation process for coir fibers, simultaneously maximizing cellulose yield and methylene blue (MB) removal efficiency. The synergistic effects of acid concentration (0.5–1.0 mol/L), temperature (90–160 °C), activation time (30–150 min), and acid type (HCl, H3PO4) were evaluated. 1.0 mol/L HCl stood out, and the linear model was the best fit for both cases; the acid type influenced MB removal efficiency, while temperature and time negatively impacted the cellulose yield. Optimal conditions (1.0 M HCl, 120 °C, 90 min) achieved a balanced performance with 80.6% cellulose yield and MB removal efficiency (90.7%, 9.07 mg/g). The distinct mesoporous profile framework and the shift of surface charge from 5.8 to 2.1 pHpzc were confirmed by BET surface analysis and the point of zero charge plot. Adsorption of MB onto the surface of the modified coir fiber adsorbents was endothermic chemisorption (ΔH0 = +117.84 kJ/mol) and underwent a spontaneous shift at elevated temperature (45 °C), well fitted by Temkin, Langmuir, pseudo-second-order kinetic (PSO), and intraparticle diffusion (IPD) models for describing the adsorption mechanism. The maximum efficiency (97.82%, 9.78 mg/g) was recorded at the optimum conditions (initial MB concentration = 50 mg/L, dose = 0.5 g/L, pH 11, contact time = 150, temperature 45 °C). Hence, the hydrochar produced in this work has shown promise for scalability.

Förderung

  • Institute for Nanotechnology and Water Sustainability, University of South Africa
  • University of South Africa

Zitieren

APA

Mtweve, B. B., Managa, M., Moja, T. N., & Mubiayi, M. P. (2026). Optimization of Hydrothermal Acid Activation of Coir Fibers: Enhancing Cellulose Yield and Cationic Dye Removal. ACS Omega. https://doi.org/10.1021/acsomega.6c02595

Vancouver

Mtweve BB, Managa M, Moja TN, Mubiayi MP. Optimization of Hydrothermal Acid Activation of Coir Fibers: Enhancing Cellulose Yield and Cationic Dye Removal. ACS Omega. 2026. doi:10.1021/acsomega.6c02595

BibTeX
@article{Mtweve2026,
  author = {Mtweve, Bosco Barnabas and Managa, Muthumuni and Moja, Tlou Nathaniel and Mubiayi, Mukuna Patrick},
  title = {Optimization of Hydrothermal Acid Activation of Coir Fibers: Enhancing Cellulose Yield and Cationic Dye Removal},
  journal = {ACS Omega},
  year = {2026},
  doi = {10.1021/acsomega.6c02595}
}
Kostenlos starten →