Nontoxic, Eco-Friendly, Low-Cost Spinning of Submicrometric Fibers from Water-Soluble Polymers Using Protic Ionic Liquids
ACS Omega · 18.08.2026 · 11 (32) · 47302-47315
DOI: 10.1021/acsomega.5c13582 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Omega, online erschienen am 06.08.2026. Verfasst von Vinícius D Silva und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Fundamental Chemistry, Institute of Chemistry, University of São Paulo, São Paulo, São Paulo 05508-000, Brazil. Die Arbeit nennt 85 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Funda??o de Amparo ? i Pesquisa do Estado de S?o Paulo, Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior, Conselho Nacional de Desenvolvimento Cient?fico e Tecnol?gico.
Abstract (Originalsprache)
Ionic liquids (ILs) are widely utilized in various scientific fields and technologies, offering environmentally friendly alternatives to toxic volatile solvents. In particular, protic ionic liquids (PILs), a subset of ILs, boast advantages such as simple synthesis, low cost, and biodegradability. ILs are promising solvents for electrospinning, enabling the production of high-quality nanometric fibers. Despite their potential, challenges persist in electrospinning polymer solutions containing ILs or poly(ionic liquid)s, mainly due to changes in solution conductivity, leading to rheological alterations and jet instabilities. In contrast, Solution Blown Spinning (SBS) offers a solution to these challenges, employing a pressurized air system without electric fields and ensuring a high rate of fiber production. This study aims to produce polymeric submicrometric fibers by leveraging the benefits of ILs as additives, along with the practicality and adaptability of the SBS technique. Twelve compositions of poly(vinyl alcohol) (PVA) and poly(vinylpyrrolidone) (PVP) using 2-hydroxydiethylammonium propionate (2-HDEAPr) PIL were spun and characterized by SEM, FTIR, and DSC analyses. The addition of 0.25 mL of PIL was sufficient to reduce the average diameter compared to pure fiber, due to the plasticizing effect of the additive. The findings confirm the feasibility of fiber production by SBS, highlighting fiber smoothness, alignment, and continuity. The average fiber diameters measured were 0.55, 0.66, and 0.91 μm, respectively, for PVA-0.25 mL, PVA-0.50 mL, and PVA-1 mL PIL. Additionally, PVP compositions exhibited an average diameter of approximately 0.40 and 0.55 μm. Such results indicate the potential of these aqueous solution blow-spun fibers for the development of eco-friendly fibrous materials.
Autor:innen und Institutionen
- Department of Fundamental Chemistry, Institute of Chemistry, University of São Paulo, São Paulo, São Paulo 05508-000, Brazil.
- Materials Science and Engineering Postgraduate Program, UFPB, João Pessoa 58051-900, Brazil.
- Engineering Campus - UACSA, Federal Rural University of Pernambuco (UFRPE), Cabo de Santo Agostinho, Pernambuco 54518430, Brazil.
- CETENS, Federal University of Recôncavo da Bahia, Feira de Santana 44042-280, Brazil.
- Department of Chemical Engineering, Federal University of Bahia, UFBA, Salvador 40210-630, Brazil.
- Laboratory of Materials and Biosystems (LAMAB), UFPB, João Pessoa 58051-900, Brazil.
ORCID-Profile: Rebecca S Andrade, José E Soares Filho, Eliton S Medeiros, Thiago A Simões
Förderung
- Funda??o de Amparo ? i Pesquisa do Estado de S?o Paulo
- Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior
- Conselho Nacional de Desenvolvimento Cient?fico e Tecnol?gico
Zitieren
APA
Silva, V. D., Silva, F. E. F., Alves, E. O., Andrade, R. S., Menezes, M. C., Soares Filho, J. E., Iglesias, M., Macedo, D. A., Medeiros, E. S., & Simões, T. A. (2026). Nontoxic, Eco-Friendly, Low-Cost Spinning of Submicrometric Fibers from Water-Soluble Polymers Using Protic Ionic Liquids. ACS Omega, 11(32), 47302-47315. https://doi.org/10.1021/acsomega.5c13582
Vancouver
Silva VD, Silva FEF, Alves EO, Andrade RS, Menezes MC, Soares Filho JE, et al. Nontoxic, Eco-Friendly, Low-Cost Spinning of Submicrometric Fibers from Water-Soluble Polymers Using Protic Ionic Liquids. ACS Omega. 2026;11(32):47302-47315. doi:10.1021/acsomega.5c13582
BibTeX
@article{Silva2026,
author = {Silva, Vinícius D and Silva, Fabio E F and Alves, Elizeth O and Andrade, Rebecca S and Menezes, Maurício C and Soares Filho, José E and Iglesias, Miguel and Macedo, Daniel A and Medeiros, Eliton S and Simões, Thiago A},
title = {Nontoxic, Eco-Friendly, Low-Cost Spinning of Submicrometric Fibers from Water-Soluble Polymers Using Protic Ionic Liquids},
journal = {ACS Omega},
year = {2026},
volume = {11},
number = {32},
pages = {47302--47315},
doi = {10.1021/acsomega.5c13582}
}
EUVIMED