EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Hydrophilic Co-bonding Strategy of Cu–Cu and Al 2 O 3 –Al 2 O 3 for 3D Integration

Lianyu Wang iD, Kailin Ren, Kun Bai, Hongzhu Chen, Xingwei Ding, Luqiao Yin, Jianhua Zhang iD

ACS Omega · 26.05.2026 · 11 (20) · 29477-29487

DOI: 10.1021/acsomega.5c11163 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 14.05.2026. Verfasst von Lianyu Wang und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Microelectronics, Shanghai University, Shanghai 200444, China. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Natural Science Foundation of Shanghai Municipality, Shanghai Municipal Commission of Economy and Informatization, National Key Research and Development Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cu/SiO2 hybrid bonding has been considered one of the most promising advanced packaging technologies. However, due to the inferior thermal conductivity and potentially lower bonding strength of SiO2 compared with atomic layer deposited Al2O3, Cu/Al2O3 hybrid bonding has become an attractive technology to be developed. In this work, activation and bonding conditions for Cu–Cu and Al2O3–Al2O3 hydrophilic bonding are comprehensively investigated, with a combined formic acid and inductively coupled plasma (ICP) activation strategy being proposed. Plasma activation conditions for cobonding of Cu–Cu and Al2O3–Al2O3 interfaces, such as plasma type and activation time, are optimized. The influence of formic acid treatment on Cu surface resistivity and its compatibility with Al2O3 bonding is investigated. Additionally, the influence of annealing processes on bonding quality is analyzed. It is observed that Ar ICP-treated Cu and Al2O3 surfaces exhibit minimum root-mean-square roughness values of 1.53 and 0.125 nm, respectively, at an optimized ICP activation duration of 100 s. The combined formic acid and ICP activation strategy achieves the lowest sheet resistance of 0.31 Ω/sq on Cu surfaces. After annealing, the shear force of Cu–Cu and Al2O3–Al2O3 bonding is enhanced by 51% and 163%, respectively. Through synergistic formic acid–ICP activation followed by annealing at 300 °C, tightly bonded Cu–Cu and Al2O3–Al2O3 interfaces are realized with shear strengths of 4.05 and 1.65 MPa. This work provides experimental references and guidance for Cu/Al2O3 hybrid bonding technology.

Autor:innen und Institutionen

  • School of Microelectronics, Shanghai University, Shanghai 200444, China.
  • Shanghai Collaborative Innovation Center of Intelligent Sensing Chip Technology, Shanghai University, Shanghai 200444, China.
  • Shanghai Key Laboratory of Chips and Systems for Intelligent Connected Vehicle, Shanghai University, Shanghai 200444, China.
  • Key Laboratory of Advanced Display and System Applications (Ministry of Education), Shanghai University, Shanghai 200444, China.

ORCID-Profile: Lianyu Wang, Jianhua Zhang

Förderung

  • Natural Science Foundation of Shanghai Municipality
  • Shanghai Municipal Commission of Economy and Informatization
  • National Key Research and Development Program of China
  • National Natural Science Foundation of China

Zitieren

APA

Wang, L., Ren, K., Bai, K., Chen, H., Ding, X., Yin, L., & Zhang, J. (2026). Hydrophilic Co-bonding Strategy of Cu–Cu and Al 2 O 3 –Al 2 O 3 for 3D Integration. ACS Omega, 11(20), 29477-29487. https://doi.org/10.1021/acsomega.5c11163

Vancouver

Wang L, Ren K, Bai K, Chen H, Ding X, Yin L, et al. Hydrophilic Co-bonding Strategy of Cu–Cu and Al 2 O 3 –Al 2 O 3 for 3D Integration. ACS Omega. 2026;11(20):29477-29487. doi:10.1021/acsomega.5c11163

BibTeX
@article{Wang2026,
  author = {Wang, Lianyu and Ren, Kailin and Bai, Kun and Chen, Hongzhu and Ding, Xingwei and Yin, Luqiao and Zhang, Jianhua},
  title = {Hydrophilic Co-bonding Strategy of Cu–Cu and Al 2 O 3 –Al 2 O 3 for 3D Integration},
  journal = {ACS Omega},
  year = {2026},
  volume = {11},
  number = {20},
  pages = {29477--29487},
  doi = {10.1021/acsomega.5c11163}
}
Kostenlos starten →