EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Vertical Shaft Drilling Rig Frequency Conversion Electronic Control Design and Its Energy Saving and Noise Reduction Effect Analysis

Guoliang Tian, Zhengjiang Ding iD, Baolin Liu, Zhenhua Shang, Ke Zhao, Xin Jiang

ACS Omega · 19.08.2025 · 10 (32) · 35907-35915

DOI: 10.1021/acsomega.5c03040 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 05.08.2025. Verfasst von Guoliang Tian und 5 weiteren Autor:innen. Beteiligte Einrichtung: China University of Geosciences (Beijing), Beijing 100083, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Taishan Scholar Project of Shandong Province, Key Technology Research and Development Program of Shandong Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Traditional vertical shaft drilling rigs often suffer from inconsistent speed regulation, high energy consumption, and excessive noise. To address these challenges, this work proposes a frequency conversion control scheme and validates its feasibility through theoretical analysis and experimental testing. The retrofit employs a variable frequency drive to enable stepless speed adjustment, allowing dynamic control of the motor input frequency and voltage. This results in continuously variable speed regulation, significantly enhancing the drilling efficiency and adaptability to diverse geological conditions. By optimizing load characteristics, the system achieves substantial energy savings, with field tests demonstrating over 35% reduction in electricity usage compared with the original model. For an annual operation of 10 months, this translates to estimated savings of 62,742 kWh. Additionally, the average noise level of the retrofitted motor decreases from 94.28 to 89.51 dB, falling below the 90 dB occupational noise exposure limit. The upgraded electronic control system also incorporates multiple safety features, including overcurrent and overvoltage protection, reducing operational risks. These test-verified results of the inverter-based retrofit demonstrate its potential to advance traditional drilling rigs toward greater efficiency, intelligence, and sustainability, offering valuable technical insights for modernizing geological drilling equipment.

Autor:innen und Institutionen

  • China University of Geosciences (Beijing), Beijing 100083, China.
  • Geology and Mineral Exploration and Development Bureau (Sixth Geological and Mineral Exploration Institute of Shandong Province), Weihai, Shandong 265400, China.
  • Deep Gold Exploration and Mining Technology Innovation Center, Ministry of Natural Resources, Weihai, Shandong 265400, China.

ORCID-Profile: Zhengjiang Ding

Förderung

  • Taishan Scholar Project of Shandong Province
  • Key Technology Research and Development Program of Shandong Province

Zitieren

APA

Tian, G., Ding, Z., Liu, B., Shang, Z., Zhao, K., & Jiang, X. (2025). Vertical Shaft Drilling Rig Frequency Conversion Electronic Control Design and Its Energy Saving and Noise Reduction Effect Analysis. ACS Omega, 10(32), 35907-35915. https://doi.org/10.1021/acsomega.5c03040

Vancouver

Tian G, Ding Z, Liu B, Shang Z, Zhao K, Jiang X. Vertical Shaft Drilling Rig Frequency Conversion Electronic Control Design and Its Energy Saving and Noise Reduction Effect Analysis. ACS Omega. 2025;10(32):35907-35915. doi:10.1021/acsomega.5c03040

BibTeX
@article{Tian2025,
  author = {Tian, Guoliang and Ding, Zhengjiang and Liu, Baolin and Shang, Zhenhua and Zhao, Ke and Jiang, Xin},
  title = {Vertical Shaft Drilling Rig Frequency Conversion Electronic Control Design and Its Energy Saving and Noise Reduction Effect Analysis},
  journal = {ACS Omega},
  year = {2025},
  volume = {10},
  number = {32},
  pages = {35907--35915},
  doi = {10.1021/acsomega.5c03040}
}
Kostenlos starten →