EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Chemical Process Enhancement of Pyrolytic Carbon Black from Waste Tires

Teerapat Anupabphan, Napan Narischat, Kampanart Theinnoi iD, Unalome Wetwatana Hartley iD, Chonlakarn Wongkhorsub iD

ACS Omega · 23.09.2025 · 10 (37) · 42451-42460

DOI: 10.1021/acsomega.5c02908 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 09.09.2025. Verfasst von Teerapat Anupabphan und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Industrial Technology, King Mongkut's University of Technology North Bangkok, 1518 Pracharat 1 Road, Wongsawang, Bangsue, Bangkok 10800, T…. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Research Council of Thailand, College of Industrial Technology, King Mongkut?s University of Technology North Bangkok.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The pyrolysis of end-of-life tires presents a sustainable route for converting waste into valuable products, including pyrolytic carbon black (CBp). However, the high ash content in CBp (∼17-21%) limits its reinforcement performance compared with commercial carbon black (e.g., N330). This study investigates the enhancement of CBp through acid-base chemical treatment using hydrochloric acid (HCl) and sodium hydroxide (NaOH). Optimal duel treatment conditions (6 M HCl and 2 M NaOH, 70 °C, 60 min, 10 mL/g) reduced ash content from 17.15 to 2.25% and increased the Brunauer-Emmett-Teller (BET) surface area from 60.56 to 70.22 m2/g, surpassing that of N330 (39.08 m2/g). Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX) revealed improved surface morphology and elemental purity, while Fourier-transform infrared (FTIR) and X-ray diffraction (XRD) confirmed enhanced functionalization and graphitic crystallinity. Although treated CBp exhibited only moderate improvements in mechanical properties within styrene-butadiene rubber (SBR) vulcanizates, it showed significantly better dispersion and elongation performance. A comparative Life Cycle Inventory (LCA) indicated that treated CBp (especially dCBp-duel) achieves superior purity and surface properties but at the cost of higher global warming potential (GWP) and water use. In contrast, raw CBp offers the lowest environmental burden and N330 has the highest energy demand. Trade-offs must be considered depending on application priority, performance, and sustainability.

Autor:innen und Institutionen

  • College of Industrial Technology, King Mongkut's University of Technology North Bangkok, 1518 Pracharat 1 Road, Wongsawang, Bangsue, Bangkok 10800, Thailand.
  • Research Centre for Combustion Technology and Alternative Energy (CTAE), Science and Technology Research Institute, King Mongkut's University of Technology North Bangkok, Bangkok 10800, Thailand.
  • Chemical Engineering and Management, The Sirindhorn International Thai-German Graduate School of Engineering, King Mongkut's University of Technology North Bangkok, Bangkok 10800, Thailand.

ORCID-Profile: Kampanart Theinnoi, Unalome Wetwatana Hartley, Chonlakarn Wongkhorsub

Förderung

  • National Research Council of Thailand
  • College of Industrial Technology, King Mongkut?s University of Technology North Bangkok

Zitieren

APA

Anupabphan, T., Narischat, N., Theinnoi, K., Hartley, U. W., & Wongkhorsub, C. (2025). Chemical Process Enhancement of Pyrolytic Carbon Black from Waste Tires. ACS Omega, 10(37), 42451-42460. https://doi.org/10.1021/acsomega.5c02908

Vancouver

Anupabphan T, Narischat N, Theinnoi K, Hartley UW, Wongkhorsub C. Chemical Process Enhancement of Pyrolytic Carbon Black from Waste Tires. ACS Omega. 2025;10(37):42451-42460. doi:10.1021/acsomega.5c02908

BibTeX
@article{Anupabphan2025,
  author = {Anupabphan, Teerapat and Narischat, Napan and Theinnoi, Kampanart and Hartley, Unalome Wetwatana and Wongkhorsub, Chonlakarn},
  title = {Chemical Process Enhancement of Pyrolytic Carbon Black from Waste Tires},
  journal = {ACS Omega},
  year = {2025},
  volume = {10},
  number = {37},
  pages = {42451--42460},
  doi = {10.1021/acsomega.5c02908}
}
Kostenlos starten →