EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Electromagnetic Interference Shielding Properties of Conductive Polyaniline/TiO2/MoS2 Hybrid Composites

Aravinth Dhanasekaran iD, Amit Malakar, A Lakshmanan, Vitezslav Stranak, Suryasarathi Bose, Kannadassan Dhanaraj iD, Velmurugan Venugopal iD

ACS Omega · 08.07.2025 · 10 (26) · 28143-28152

DOI: 10.1021/acsomega.5c02527 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 23.06.2025. Verfasst von Aravinth Dhanasekaran und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Advanced Sciences, Vellore Institute of Technology, Vellore, Tamil Nadu 632014, India. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: VIT University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the hybrid ternary composite of polyaniline (PANI), titanium dioxide (TiO2), and molybdenum disulfide (MoS2) to improve electromagnetic interference (EMI) shielding in high-frequency electronic devices. The study examines the shielding effectiveness (SE) of this hybrid composite by altering MoS2 concentrations. The composite was created through a four-stage in situ polymerization method, with MoS2 levels at 10, 20, and 30 wt % and a fixed TiO2 content of 10 wt %. A Vector network analyzer (VNA) was employed to measure EMI SE and complex permittivity in the 8.2–12.4 GHz frequency range. The composite with 20 wt % MoS2 exhibited the highest SE of 50.86 dB for 3 mm thickness, surpassing other formulations. The enhanced shielding performance is credited to the synergistic effects of MoS2 and TiO2, which enhance the impedance matching, electrical conductivity, and electromagnetic wave dissipation. Further analysis revealed that factors, such as binding and agglomeration during in situ polymerization, along with electromagnetic absorption and multiple scattering mechanisms, significantly influence the shielding process. The results indicate that the optimized PANI/TiO2/MoS2 hybrid composite shows promise as an effective EMI shielding material for cutting-edge electronic and communication applications.

Autor:innen und Institutionen

  • School of Advanced Sciences, Vellore Institute of Technology, Vellore, Tamil Nadu 632014, India.
  • Department of Materials Engineering, Indian Institute of Science, C.V. Raman Avenue, Bangalore 560012, India.
  • Faculty of Science, University of South Bohemia, Branisovska 1760, Ceske Budejovice 37005, Czech Republic.
  • School of Electronics Engineering, Vellore Institute of Technology, Vellore, Tamil Nadu 632014, India.

ORCID-Profile: Aravinth Dhanasekaran, Kannadassan Dhanaraj, Velmurugan Venugopal

Förderung

  • VIT University

Zitieren

APA

Dhanasekaran, A., Malakar, A., Lakshmanan, A., Stranak, V., Bose, S., Dhanaraj, K., & Venugopal, V. (2025). Electromagnetic Interference Shielding Properties of Conductive Polyaniline/TiO2/MoS2 Hybrid Composites. ACS Omega, 10(26), 28143-28152. https://doi.org/10.1021/acsomega.5c02527

Vancouver

Dhanasekaran A, Malakar A, Lakshmanan A, Stranak V, Bose S, Dhanaraj K, et al. Electromagnetic Interference Shielding Properties of Conductive Polyaniline/TiO2/MoS2 Hybrid Composites. ACS Omega. 2025;10(26):28143-28152. doi:10.1021/acsomega.5c02527

BibTeX
@article{Dhanasekaran2025,
  author = {Dhanasekaran, Aravinth and Malakar, Amit and Lakshmanan, A and Stranak, Vitezslav and Bose, Suryasarathi and Dhanaraj, Kannadassan and Venugopal, Velmurugan},
  title = {Electromagnetic Interference Shielding Properties of Conductive Polyaniline/TiO2/MoS2 Hybrid Composites},
  journal = {ACS Omega},
  year = {2025},
  volume = {10},
  number = {26},
  pages = {28143--28152},
  doi = {10.1021/acsomega.5c02527}
}
Kostenlos starten →