Controllable Synthesis of Monodisperse CeO 2 Nanoparticles with Tunable Sizes for Chemical-Mechanical Polishing
ACS Omega · 19.08.2025 · 10 (32) · 35678-35688
DOI: 10.1021/acsomega.5c02209 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Omega, online erschienen am 06.08.2025. Verfasst von Yange Ma und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Featured Metal Materials and Life-cycle Safety for Composite Structures and School of Chemistry and Chemical Engineering, Gua…. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangxi Key Laboratory of Petrochemical Resource Processing and Process Intensification Technology, Guangxi University, Specific Research Project of Guangxi for Research Bases and Talents, National Natural Science Foundation of China.
Abstract (Originalsprache)
CeO2 has been widely employed in semiconductors and ultraprecision optical polishing on account of its remarkable physical, chemical, and mechanical qualities. In this work, we present an efficient strategy to prepare monodisperse CeO2 nanoparticles (NPs) with tunable sizes through a solvothermal method integrated with the following in situ surface modification procedure. The as-prepared CeO2 NPs exhibit excellent monodispersibility and regular spherical morphology. Their average particle diameter can be readily regulated from 7.0 to 336.3 nm by adjusting the experimental conditions. Subsequently, these obtained CeO2 NPs can be formulated into different slurries, and their polishing performances are tested. According to the results, the CeO2 polishing slurry with an average particle size of 94.5 nm has a material removal rate of 481 nm/min and a surface roughness of 0.14 nm. In contrast, the commercial product has only a material removal rate of 214 nm/min and a surface roughness of 0.30 nm. Obviously, a much faster polishing rate and a smoother surface can be achieved. Furthermore, a smaller surface roughness of 0.11 nm can be realized when the average particle size of CeO2 is reduced to 46.9 nm, which is beneficial to the ultraprecision optical polishing process and can greatly improve the quality of the material surface.
Autor:innen und Institutionen
- State Key Laboratory of Featured Metal Materials and Life-cycle Safety for Composite Structures and School of Chemistry and Chemical Engineering, Guangxi University, Nanning 530004, P. R. China.
- Guangxi Key Laboratory of Petrochemical Resource Processing and Process Intensification Technology, Guangxi University, Nanning 530004, P. R. China.
ORCID-Profile: Bo Chen, Qian Sun, Shuangliang Zhao
Förderung
- Guangxi Key Laboratory of Petrochemical Resource Processing and Process Intensification Technology, Guangxi University
- Specific Research Project of Guangxi for Research Bases and Talents
- National Natural Science Foundation of China
Zitieren
APA
Ma, Y., Qiu, T., Zhao, Z., Zou, Q., Chen, B., Sun, Q., & Zhao, S. (2025). Controllable Synthesis of Monodisperse CeO 2 Nanoparticles with Tunable Sizes for Chemical-Mechanical Polishing. ACS Omega, 10(32), 35678-35688. https://doi.org/10.1021/acsomega.5c02209
Vancouver
Ma Y, Qiu T, Zhao Z, Zou Q, Chen B, Sun Q, et al. Controllable Synthesis of Monodisperse CeO 2 Nanoparticles with Tunable Sizes for Chemical-Mechanical Polishing. ACS Omega. 2025;10(32):35678-35688. doi:10.1021/acsomega.5c02209
BibTeX
@article{Ma2025,
author = {Ma, Yange and Qiu, Tuquan and Zhao, Zhenxiang and Zou, Quan and Chen, Bo and Sun, Qian and Zhao, Shuangliang},
title = {Controllable Synthesis of Monodisperse CeO 2 Nanoparticles with Tunable Sizes for Chemical-Mechanical Polishing},
journal = {ACS Omega},
year = {2025},
volume = {10},
number = {32},
pages = {35678--35688},
doi = {10.1021/acsomega.5c02209}
}
EUVIMED