HKUST‑1 Synthesis in PET Track-Etched Membranes via Conversion of Deposited Cu for Carbon Dioxide Capture
ACS Omega · 22.07.2025 · 10 (28) · 30259-30271
DOI: 10.1021/acsomega.5c01493 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Omega, online erschienen am 11.07.2025. Verfasst von Dias D Omertassov und 6 weiteren Autor:innen. Beteiligte Einrichtung: The Institute of Nuclear Physics, Ibragimov str. 1, Almaty 050032, Kazakhstan. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Ministry of Science and Higher Education of the Republic of Kazakhstan.
Abstract (Originalsprache)
Climate change remains one of the most critical global challenges, largely driven by the rise in atmospheric CO2 levels. Effective strategies for capturing and utilizing CO2 are crucial to mitigate its environmental impact. Metal–organic frameworks (MOFs), particularly HKUST-1 (MOF-199), are promising materials due to their high surface area, porosity, and tunable properties. In this study, HKUST-1 was successfully immobilized on polyethylene terephthalate (PET) track-etched membranes, leveraging the membranes’ well-defined porosity and chemical stability. Membrane characterization via SEM revealed uniform coverage of octahedral HKUST-1 crystals with sizes ranging from 0.15 μm (inside the pores) to 1.5–5 μm (on the surface of the membrane). BET analysis of the PET TeMs-HKUST-1 composite membrane indicated a specific surface area of up to 382 m2/g. XRD confirmed the crystallinity of the HKUST-1 structure. The composite membranes exhibited CO2 sorption capabilities, with an adsorption capacity of 0.53 ± 0.03 mmol/g (after 1 h of adsorption) in the first cycle for the solvothermal method and 0.31 ± 0.02 mmol/g (after 1 h of adsorption) for the solvoshaker method. Durability tests demonstrated a stable performance over 12 adsorption–desorption cycles. These results highlight the potential of PET TeMs-HKUST-1 composite membranes for scalable and efficient CO2 capture, contributing to the development of sustainable solutions for addressing climate change.
Autor:innen und Institutionen
- The Institute of Nuclear Physics, Ibragimov str. 1, Almaty 050032, Kazakhstan.
- L.N. Gumilyov Eurasian National University, Satbaev str. 5, Astana 010008, Kazakhstan.
- Department of Chemistry, Hacettepe University, Ankara 06800, Turkey.
ORCID-Profile: Rafael I Shakirzyanov, Ilya V Korolkov
Förderung
- Ministry of Science and Higher Education of the Republic of Kazakhstan
Zitieren
APA
Omertassov, D. D., Shakayeva, A. K., Zhatkanbayeva, Z. K., Shakirzyanov, R. I., Zdorovets, M. V., Güven, O., & Korolkov, I. V. (2025). HKUST‑1 Synthesis in PET Track-Etched Membranes via Conversion of Deposited Cu for Carbon Dioxide Capture. ACS Omega, 10(28), 30259-30271. https://doi.org/10.1021/acsomega.5c01493
Vancouver
Omertassov DD, Shakayeva AK, Zhatkanbayeva ZK, Shakirzyanov RI, Zdorovets MV, Güven O, et al. HKUST‑1 Synthesis in PET Track-Etched Membranes via Conversion of Deposited Cu for Carbon Dioxide Capture. ACS Omega. 2025;10(28):30259-30271. doi:10.1021/acsomega.5c01493
BibTeX
@article{Omertassov2025,
author = {Omertassov, Dias D and Shakayeva, Aigerim Kh and Zhatkanbayeva, Zhanna K and Shakirzyanov, Rafael I and Zdorovets, Maxim V and Güven, Olgun and Korolkov, Ilya V},
title = {HKUST‑1 Synthesis in PET Track-Etched Membranes via Conversion of Deposited Cu for Carbon Dioxide Capture},
journal = {ACS Omega},
year = {2025},
volume = {10},
number = {28},
pages = {30259--30271},
doi = {10.1021/acsomega.5c01493}
}
EUVIMED