Solid-State Laser Annealing (SLA) of Fully Solution-Processed Amorphous InZnO Thin-Film Transistors at Various Fluence
ACS Omega · 15.04.2025 · 10 (14) · 14001-14009
DOI: 10.1021/acsomega.4c10687 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Omega, online erschienen am 03.04.2025. Verfasst von Nu Myat Thazin und 5 weiteren Autor:innen. Beteiligte Einrichtung: Division of Materials Science, Graduate School of Science and Technology, Nara Institute of Science and Technology, 8916-5 Takayama, Ikoma, Nara 630-…. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Japan Society for the Promotion of Science.
Abstract (Originalsprache)
Advancing next-generation metal oxide thin film technologies demands the exploration of novel treatments for active materials. These treatments need to be processed via simple and cost-effective methods and low-temperature techniques to ensure compatibility with flexible substrates that are sensitive to high-temperature (>400 °C) annealing processes. To solve this problem, photoirradiation approaches on the active layers, such as ultraviolet treatment or excimer laser annealing (ELA), have been discovered as alternatives to conventional annealing techniques. The state-of-the-art ELA is limited primarily by its high-cost maintenance. Thus, we present an alternative photo-assisted approach to functionalize the amorphous Indium Zinc Oxide (a-IZO) films by employing solid-state laser annealing (SLA) post-treatment as an inexpensive option instead of the costly ELA process. The SLA approach can functionalize the a-IZO film to improve its film conductivity and function as the gate, source, and drain electrodes. After SLA post-treatment, a-IZO TFTs exhibited switching behavior with saturation mobility (μ sat) up to 0.98 cm2 V-1 s-1 and an on-off current ratio >106 at drain voltage, V d = 5.0 V. Therefore, this method holds the potential to serve as a viable alternative to the traditional annealing process or costly ELA technique with further refinement, especially for application in flexible devices.
Autor:innen und Institutionen
- Division of Materials Science, Graduate School of Science and Technology, Nara Institute of Science and Technology, 8916-5 Takayama, Ikoma, Nara 630-0192, Japan.
- Innovavent GmbH, Reinhard-Rube-Str. 4, Goettingen 37077, Germany.
ORCID-Profile: Juan Paolo S Bermundo
Förderung
- Japan Society for the Promotion of Science
Zitieren
APA
Thazin, N. M., Bermundo, J. P. S., Hanifah, U., Richter, J., Geburt, S., & Uraoka, Y. (2025). Solid-State Laser Annealing (SLA) of Fully Solution-Processed Amorphous InZnO Thin-Film Transistors at Various Fluence. ACS Omega, 10(14), 14001-14009. https://doi.org/10.1021/acsomega.4c10687
Vancouver
Thazin NM, Bermundo JPS, Hanifah U, Richter J, Geburt S, Uraoka Y. Solid-State Laser Annealing (SLA) of Fully Solution-Processed Amorphous InZnO Thin-Film Transistors at Various Fluence. ACS Omega. 2025;10(14):14001-14009. doi:10.1021/acsomega.4c10687
BibTeX
@article{Thazin2025,
author = {Thazin, Nu Myat and Bermundo, Juan Paolo S and Hanifah, Umu and Richter, Johannes and Geburt, Sebastian and Uraoka, Yukiharu},
title = {Solid-State Laser Annealing (SLA) of Fully Solution-Processed Amorphous InZnO Thin-Film Transistors at Various Fluence},
journal = {ACS Omega},
year = {2025},
volume = {10},
number = {14},
pages = {14001--14009},
doi = {10.1021/acsomega.4c10687}
}
EUVIMED