EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Extraction of Tungsten from Tungsten Fine Mud by Caustic Soda Autoclaving

Tian Xie, Ting Pu, Yinliang Liu, Minghui Zhang, Xin Lei iD, Haodong Hu, Zanhong Chen

ACS Omega · 25.02.2025 · 10 (7) · 6901-6907

DOI: 10.1021/acsomega.4c09403 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 16.02.2025. Verfasst von Tian Xie und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Minerals Processing & Bioengineering, Central South University, Changsha, Hunan 410000, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Government of Jiangxi Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tungsten fine mud is a type of tailings containing minerals such as quartz and potassium feldspar as well as a small amount of tungsten. In this article, tungsten fine mud was decomposed by caustic soda autoclaving. The results showed that at a temperature of 160 °C, caustic soda concentration of 100 g/L, treatment time of 2 h, liquid/solid ratio of 2.5:1 mL/g, and rotation rate of 400 rpm, the residue contained 0.28% WO3, and the leaching efficiency of WO3 was 94.97%. The optimal caustic leaching residue was subjected to SEM–EDS analysis, and the tungsten is mainly present as CaWO4 and FeWO4, is distributed in silicate particles, and is difficult to leach. Then, the effect of the number of cycles of autoclaving on tungsten leaching from tungsten fine mud was studied. The caustic concentration of the caustic leaching solution was always maintained at 100 g/L. After 12 cycles, the WO3 concentration in the caustic leaching solution increased from 15.88 to 120.15 g/L. The leaching efficiency of WO3 remained at 91% during the cycling process, and the caustic mass consumption in a single cycle was approximately 22%.

Autor:innen und Institutionen

  • School of Minerals Processing & Bioengineering, Central South University, Changsha, Hunan 410000, China.
  • School of Metallurgical Engineering, Jiangxi University of Science and Technology, Ganzhou, Jiangxi 341000, China.

ORCID-Profile: Xin Lei

Förderung

  • Government of Jiangxi Province

Zitieren

APA

Xie, T., Pu, T., Liu, Y., Zhang, M., Lei, X., Hu, H., & Chen, Z. (2025). Extraction of Tungsten from Tungsten Fine Mud by Caustic Soda Autoclaving. ACS Omega, 10(7), 6901-6907. https://doi.org/10.1021/acsomega.4c09403

Vancouver

Xie T, Pu T, Liu Y, Zhang M, Lei X, Hu H, et al. Extraction of Tungsten from Tungsten Fine Mud by Caustic Soda Autoclaving. ACS Omega. 2025;10(7):6901-6907. doi:10.1021/acsomega.4c09403

BibTeX
@article{Xie2025,
  author = {Xie, Tian and Pu, Ting and Liu, Yinliang and Zhang, Minghui and Lei, Xin and Hu, Haodong and Chen, Zanhong},
  title = {Extraction of Tungsten from Tungsten Fine Mud by Caustic Soda Autoclaving},
  journal = {ACS Omega},
  year = {2025},
  volume = {10},
  number = {7},
  pages = {6901--6907},
  doi = {10.1021/acsomega.4c09403}
}
Kostenlos starten →