EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Experimental Investigation of Combustion and Emission Characteristics of Ethanol–Gasoline Blends across Varying Operating Parameters

Li Wang, Zhaoming Huang iD, Longjun Ren, Binbin Tao, Jinyuan Pan

ACS Omega · 29.04.2025 · 10 (16) · 16079-16089

DOI: 10.1021/acsomega.4c09398 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 15.04.2025. Verfasst von Li Wang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Automotive, Xuancheng Vocational & Technical College, Xuancheng 242000, China. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Anhui Department of Education, Key projects of natural science research in colleges and universities of Anhui Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ethanol-gasoline is a significant approach to achieving low-carbon combustion engines. In this article, the combustion and emission characteristics of ethanol-gasoline (E22) and ordinary gasoline under varying air-fuel ratios, injection pressures, and ignition timings are experimentally investigated, and the engine performances and combustion characteristics of both fuels are compared under full-load conditions. The results show that the combustion stability of E22 is slightly lower than that of gasoline at different air-fuel ratios, and the ignition delay and combustion duration are slightly longer than that of gasoline, but the thermal efficiency of E22 is higher due to the lower exhaust energy loss. Emission trends with respect to the air-fuel ratio are similar for both fuels, with E22 showing slightly lower carbon monoxide (CO) and nitrogen oxide (NOx) emissions. Moreover, engine performance at medium and high loads is more sensitive to injection pressure compared to low loads. An appropriate increase in the injection pressure can significantly enhance the mixture quality, leading to higher thermal efficiency and lower emissions. Conversely, an excessive injection pressure may result in increased CO and total hydrocarbon emissions (THC). E22 can deliver comparable power to that of gasoline while also achieving an earlier combustion phase and higher thermal efficiency for greater resistance to detonation under full-load conditions. Furthermore, the higher oxygen content of E22 leads to a notable reduction in the intake pressure required.

Autor:innen und Institutionen

  • School of Automotive, Xuancheng Vocational & Technical College, Xuancheng 242000, China.
  • School of Mechanical Engineering, Nanjing University of Science & Technology, Nanjing 210094, China.
  • School of Mechanical Engineering, Wanjiang University of Technology, Ma'anshan 243031, China.
  • Chery Automobile Engineering Research Institute, Wuhu 241006, China.

ORCID-Profile: Zhaoming Huang

Förderung

  • Anhui Department of Education
  • Key projects of natural science research in colleges and universities of Anhui Province

Zitieren

APA

Wang, L., Huang, Z., Ren, L., Tao, B., & Pan, J. (2025). Experimental Investigation of Combustion and Emission Characteristics of Ethanol–Gasoline Blends across Varying Operating Parameters. ACS Omega, 10(16), 16079-16089. https://doi.org/10.1021/acsomega.4c09398

Vancouver

Wang L, Huang Z, Ren L, Tao B, Pan J. Experimental Investigation of Combustion and Emission Characteristics of Ethanol–Gasoline Blends across Varying Operating Parameters. ACS Omega. 2025;10(16):16079-16089. doi:10.1021/acsomega.4c09398

BibTeX
@article{Wang2025,
  author = {Wang, Li and Huang, Zhaoming and Ren, Longjun and Tao, Binbin and Pan, Jinyuan},
  title = {Experimental Investigation of Combustion and Emission Characteristics of Ethanol–Gasoline Blends across Varying Operating Parameters},
  journal = {ACS Omega},
  year = {2025},
  volume = {10},
  number = {16},
  pages = {16079--16089},
  doi = {10.1021/acsomega.4c09398}
}
Kostenlos starten →