EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Reaction Characteristics of Calcination and Decomposition of Phosphogypsum in a Bubbling Fluidized Bed

Pengxing Yuan iD, Meng Li, Jun Hu, Lin Li, Shiyi Chen iD, Wenguo Xiang iD

ACS Omega · 13.08.2024 · 9 (32) · 35060-35068

DOI: 10.1021/acsomega.4c05240 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 03.08.2024. Verfasst von Pengxing Yuan und 5 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment, Southeast University, Nanjing 211…. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Natural Science Foundation of China, Phosphogypsum low-temperature decomposition to produce calcium-based materials and sulfuric acid raw gas technology (Horizontal Project).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A bubbling fluidized bed reactor is designed to investigate the high-temperature calcination and decomposition characteristics of phosphogypsum (PG). The reactor employs electric heating, and a lifting discharge tube is installed in the middle of the air distributor to allow flexible switching between batch and continuous feeding modes. The batch test results show that the solid-phase bed materials with a PG particle size of 0.27-0.55 mm and a coal particle size of 0.55-0.83 mm are found to have uniformly mixed at a PG/coal mass ratio of 5:1 and calcined at a high temperature of 1100 °C for 30 min. PG completely decomposes to yield mainly CaS and a small amount of Ca2(SiO4) as the solid-phase products. For the above-mentioned optimal process parameters, a 120 min thermal-state continuous test is conducted. Feeding and discharging are performed at intervals of 30 min to maintain the stability of the static bed height inside the reactor. The results indicate that the PG decomposition rate is higher than 92% in the batch and continuous tests. However, the continuous decomposition of PG has significant process advantages, such as a higher CaS yield (71.20%) compared to that in the batch mode (64.49%). Furthermore, PG undergoes agglomeration and bonding within the particles when heated, intensifying the formation of a Ca2(SiO4) eutectic.

Autor:innen und Institutionen

  • Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment, Southeast University, Nanjing 211189, China.
  • SINOPEC Nanjing Engineering & Construction Incorporation, Nanjing 210049, China.
  • College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310058, China.
  • School of Petroleum and Natural Gas Engineering, School of Energy, Changzhou University, Changzhou 213164, China.

ORCID-Profile: Pengxing Yuan, Shiyi Chen, Wenguo Xiang

Förderung

  • National Natural Science Foundation of China
  • Phosphogypsum low-temperature decomposition to produce calcium-based materials and sulfuric acid raw gas technology (Horizontal Project)

Zitieren

APA

Yuan, P., Li, M., Hu, J., Li, L., Chen, S., & Xiang, W. (2024). Reaction Characteristics of Calcination and Decomposition of Phosphogypsum in a Bubbling Fluidized Bed. ACS Omega, 9(32), 35060-35068. https://doi.org/10.1021/acsomega.4c05240

Vancouver

Yuan P, Li M, Hu J, Li L, Chen S, Xiang W. Reaction Characteristics of Calcination and Decomposition of Phosphogypsum in a Bubbling Fluidized Bed. ACS Omega. 2024;9(32):35060-35068. doi:10.1021/acsomega.4c05240

BibTeX
@article{Yuan2024,
  author = {Yuan, Pengxing and Li, Meng and Hu, Jun and Li, Lin and Chen, Shiyi and Xiang, Wenguo},
  title = {Reaction Characteristics of Calcination and Decomposition of Phosphogypsum in a Bubbling Fluidized Bed},
  journal = {ACS Omega},
  year = {2024},
  volume = {9},
  number = {32},
  pages = {35060--35068},
  doi = {10.1021/acsomega.4c05240}
}
Kostenlos starten →