Fracturing Construction Curves and Fracture Geometries of Coals in the Southern Qinshui Basin, China: Implication for Coalbed Methane Productivity
ACS Omega · 16.07.2024 · 9 (28) · 30436-30451
DOI: 10.1021/acsomega.4c01879 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Omega, online erschienen am 01.07.2024. Verfasst von Yifan Pu und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Energy Resources, China University of Geosciences (Beijing), Beijing 100083, P. R. China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
Hydraulic fracturing technology has become a common practice to enhance the permeability of coal seams, and its effectiveness significantly impacts the productivity of coalbed methane (CBM) wells. In this study, multiple data sets, including fracturing reports, productivity data, and microseismic monitoring, were utilized to analyze the factors influencing fracturing effectiveness and gas well production at the southern margin of the Qinshui Basin, China, especially the Zhengzhuang and Fanzhuang blocks. Statistics revealed that the fracturing displacement, liquid consumption, and sand consumption were 8 m3/min, 17.69–1386.52 m3 (averaging 728.42 m3), and 28.5–46.1 m3 (averaging 40 m3), respectively. There were differences in the types of fracturing curves among blocks or well groups, and the natural fracture system was identified as the key factor affecting their characteristics. The coal seams with high density of microfractures in Zhengzhuang reduce the fracture threshold of reservoirs during hydraulic fracturing, resulting in a lower fracture response ratio than that of Fanzhuang (71.0 vs 80.3%). Well groups with higher microfracture width in coal seams (Group-ZC and DS) experienced a further reduction in fracture response (averaging 67.2 vs 80.3%), and the connection of hydraulic fractures (HFs) with these high-permeability microfractures lead to an increase in the proportion of fluctuating fracturing curves (averaging 52.2 vs 33.6%). Regional structural features and fracturing effectiveness jointly affected the production of CBM wells. The productivity in Zhengzhuang was lower than that in Fanzhuang due to the highly developed faults and deeply buried coal seams. Shallow coal seams with a high width of microfractures and a low-stress environment were easily supported by a proppant, forming a complex HF network and yielding a high productivity (Group-ZC and DS). For other deeper well groups, proppant migration became unfavorable once high-angle and complex branch HF clusters formed in coal seams, leading to local low-efficiency wells and fluctuating fracturing curves.
Autor:innen und Institutionen
- School of Energy Resources, China University of Geosciences (Beijing), Beijing 100083, P. R. China.
- Coal Reservoir Laboratory of National Engineering Research Center of Coalbed Methane Development & Utilization, Beijing 100083, P. R. China.
- Beijing Key Laboratory of Unconventional Natural Gas Geological Evaluation and Development Engineering, Beijing 100083, P. R. China.
ORCID-Profile: Song Li, Dazhen Tang
Förderung
- National Natural Science Foundation of China
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Pu, Y., Li, S., & Tang, D. (2024). Fracturing Construction Curves and Fracture Geometries of Coals in the Southern Qinshui Basin, China: Implication for Coalbed Methane Productivity. ACS Omega, 9(28), 30436-30451. https://doi.org/10.1021/acsomega.4c01879
Vancouver
Pu Y, Li S, Tang D. Fracturing Construction Curves and Fracture Geometries of Coals in the Southern Qinshui Basin, China: Implication for Coalbed Methane Productivity. ACS Omega. 2024;9(28):30436-30451. doi:10.1021/acsomega.4c01879
BibTeX
@article{Pu2024,
author = {Pu, Yifan and Li, Song and Tang, Dazhen},
title = {Fracturing Construction Curves and Fracture Geometries of Coals in the Southern Qinshui Basin, China: Implication for Coalbed Methane Productivity},
journal = {ACS Omega},
year = {2024},
volume = {9},
number = {28},
pages = {30436--30451},
doi = {10.1021/acsomega.4c01879}
}
EUVIMED