EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Mechanical and Thermal Properties of Porous Nanocellulose/Polymer Composites: Influence of the Polymer Chemical Structure and Porosity

Naoki Tamura, Kota Hasunuma, Tsuguyuki Saito iD, Shuji Fujisawa iD

ACS Omega · 30.04.2024 · 9 (17) · 19560-19565

DOI: 10.1021/acsomega.4c01206 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 15.04.2024. Verfasst von Naoki Tamura und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomaterial Sciences, Graduate School of Agricultural and Life Sciences, The University of Tokyo, 1-1-1 Yayoi, Bunkyo-ku, Tokyo 113-865…. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Core Research for Evolutional Science and Technology, Japan Society for the Promotion of Science.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The excellent emulsifying capacity of nanocellulose allows for the preparation of porous nanocellulose/polymer composites through the emulsion templating process. However, the effects of the polymer chemical structure and porosity on the material properties have not been extensively explored. Here, we discuss the effects of these two factors on the thermal and mechanical properties of the composites. Two types of porous nanocellulose/polymer composites were fabricated with styrene-divinylbenzene (poly(St-co-DVB)) or styrene-poly(ethylene glycol) dimethacrylate (poly(St-co-EGDMA)) copolymers as the polymer phases. The porosity of the composite was changed up to ∼50% v/v by varying the aqueous phase volume fraction in the original nanocellulose-stabilized w/o emulsions. As the porosity increased, the thermal conductivity of the composite decreased. The mechanical properties were strongly influenced by the polymer type; the nanocellulose/poly(St-co-DVB) composite showed stiff but brittle behavior, whereas the nanocellulose/poly(St-co-EGDMA) composite showed higher strength and toughness. In both types of composites, the nanocelluloses served as reinforcing agents, contributing to the improvement of the mechanical properties.

Autor:innen und Institutionen

  • Department of Biomaterial Sciences, Graduate School of Agricultural and Life Sciences, The University of Tokyo, 1-1-1 Yayoi, Bunkyo-ku, Tokyo 113-8657, Japan.

ORCID-Profile: Tsuguyuki Saito, Shuji Fujisawa

Förderung

  • Core Research for Evolutional Science and Technology
  • Japan Society for the Promotion of Science

Zitieren

APA

Tamura, N., Hasunuma, K., Saito, T., & Fujisawa, S. (2024). Mechanical and Thermal Properties of Porous Nanocellulose/Polymer Composites: Influence of the Polymer Chemical Structure and Porosity. ACS Omega, 9(17), 19560-19565. https://doi.org/10.1021/acsomega.4c01206

Vancouver

Tamura N, Hasunuma K, Saito T, Fujisawa S. Mechanical and Thermal Properties of Porous Nanocellulose/Polymer Composites: Influence of the Polymer Chemical Structure and Porosity. ACS Omega. 2024;9(17):19560-19565. doi:10.1021/acsomega.4c01206

BibTeX
@article{Tamura2024,
  author = {Tamura, Naoki and Hasunuma, Kota and Saito, Tsuguyuki and Fujisawa, Shuji},
  title = {Mechanical and Thermal Properties of Porous Nanocellulose/Polymer Composites: Influence of the Polymer Chemical Structure and Porosity},
  journal = {ACS Omega},
  year = {2024},
  volume = {9},
  number = {17},
  pages = {19560--19565},
  doi = {10.1021/acsomega.4c01206}
}
Kostenlos starten →