EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Powder Synthesis and Characterization of Al 0.5 CoCrFeNi High-Entropy Alloy for Additive Manufacturing Prepared by the Plasma Rotating Electrode Process

Yanchun Li iD, Yi Sui, Yicheng Feng, Yu Zhang, Yan Li, Meihui Song, Shulin Gong, Yang Xie

ACS Omega · 23.04.2024 · 9 (16) · 18358-18365

DOI: 10.1021/acsomega.4c00291 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 11.04.2024. Verfasst von Yanchun Li und 7 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Advanced Technology, Heilongjiang Academy of Science, Harbin 150000, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Heilongjiang Provincial Finance Department, Heilongjiang Academy of Sciences.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Al0.5CoCrFeNi high-entropy alloy powder was produced by using a plasma rotating electrode process. The morphology, microstructure, and physical properties of the powder were characterized. The powder exhibited a smooth surface and a narrow particle size distribution with a single peak. The relationships between particle size and secondary dendrite arm space as well as cooling rate were evaluated as follows: λ = 0.0105d + 0.062 and vc = 4.34 × 10-5d-2 + 2.62 × 10-2d-3/2, respectively. The Al0.5CoCrFeNi powder mainly consisted of fcc + bcc phases. As the powder particle size decreased, the microstructure of the powder changed from dendritic to columnar or equiaxed, along with a decrease in the fcc content and an increase in the bcc content. The tap density (4.76 g cm-3), flowability (15.01 s × 50 g-1), oxygen content ( 94%) of the powder indicated suitability for additive manufacturing.

Autor:innen und Institutionen

  • Institute of Advanced Technology, Heilongjiang Academy of Science, Harbin 150000, China.
  • School of Materials Science and Chemical Engineering, Harbin University of Science and Technology, Harbin 150080, China.

ORCID-Profile: Yanchun Li

Förderung

  • Heilongjiang Provincial Finance Department
  • Heilongjiang Academy of Sciences

Zitieren

APA

Li, Y., Sui, Y., Feng, Y., Zhang, Y., Li, Y., Song, M., Gong, S., & Xie, Y. (2024). Powder Synthesis and Characterization of Al 0.5 CoCrFeNi High-Entropy Alloy for Additive Manufacturing Prepared by the Plasma Rotating Electrode Process. ACS Omega, 9(16), 18358-18365. https://doi.org/10.1021/acsomega.4c00291

Vancouver

Li Y, Sui Y, Feng Y, Zhang Y, Li Y, Song M, et al. Powder Synthesis and Characterization of Al 0.5 CoCrFeNi High-Entropy Alloy for Additive Manufacturing Prepared by the Plasma Rotating Electrode Process. ACS Omega. 2024;9(16):18358-18365. doi:10.1021/acsomega.4c00291

BibTeX
@article{Li2024,
  author = {Li, Yanchun and Sui, Yi and Feng, Yicheng and Zhang, Yu and Li, Yan and Song, Meihui and Gong, Shulin and Xie, Yang},
  title = {Powder Synthesis and Characterization of Al 0.5 CoCrFeNi High-Entropy Alloy for Additive Manufacturing Prepared by the Plasma Rotating Electrode Process},
  journal = {ACS Omega},
  year = {2024},
  volume = {9},
  number = {16},
  pages = {18358--18365},
  doi = {10.1021/acsomega.4c00291}
}
Kostenlos starten →