EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Experimental Study on the Erosion–Corrosion Characteristics of Desulfurization Slurry on Stainless Steel Pipe Materials

Gaofeng Fan, Jinming Zhang, Tianlin Yuan, Chang'an Wang iD, Yujie Hou, Xinyue Gao, Jie Xu, Defu Che iD

ACS Omega · 13.02.2024 · 9 (6) · 7132-7142

DOI: 10.1021/acsomega.3c09065 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 02.02.2024. Verfasst von Gaofeng Fan und 7 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Multiphase Flow in Power Engineering, School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an 710049, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Natural Science Basic Research Program of Shaanxi Province, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The recovery of low-grade waste heat from power plants greatly benefits energy conservation and emission reduction during electricity generation, while the waste heat utilization directly from desulfurization slurry is a significantly promising method to deeply recover such low-grade energy and has been developed in practical application. However, the pipe materials are subjected to erosion and corrosion challenges due to the high level of solid compositions and the presence of harmful ions, such as Cl–1, which requires further evaluation under the condition of slurry heat exchange. The present study aimed at an experimental study on the erosion–corrosion characteristics of desulfurization slurry on three types of stainless steel, including type 304, 316L, and 2205. Both mass loss and micromorphology features were analyzed with possible mechanisms elucidated. The erosion–corrosion rate is weak at low temperatures, while the increase in the slurry temperature clearly promotes its rate. The influence of the temperature on the corrosion resistance of 304 is much greater than that of 2205. With an increase in duration time, the weight loss rate of stainless steel in the desulfurization slurry declines, and the changing trend of metal mass slightly slows down. The present study offers a better understanding of the erosion–corrosion behaviors of three types of stainless steel under flow and heat transfer conditions of a desulfurization slurry.

Autor:innen und Institutionen

  • State Key Laboratory of Multiphase Flow in Power Engineering, School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an 710049, China.
  • Henan Hanzhiyue New Material Co., Ltd., Zhengzhou 450000, China.

ORCID-Profile: Chang'an Wang, Defu Che

Förderung

  • Natural Science Basic Research Program of Shaanxi Province
  • National Natural Science Foundation of China

Zitieren

APA

Fan, G., Zhang, J., Yuan, T., Wang, C., Hou, Y., Gao, X., Xu, J., & Che, D. (2024). Experimental Study on the Erosion–Corrosion Characteristics of Desulfurization Slurry on Stainless Steel Pipe Materials. ACS Omega, 9(6), 7132-7142. https://doi.org/10.1021/acsomega.3c09065

Vancouver

Fan G, Zhang J, Yuan T, Wang C, Hou Y, Gao X, et al. Experimental Study on the Erosion–Corrosion Characteristics of Desulfurization Slurry on Stainless Steel Pipe Materials. ACS Omega. 2024;9(6):7132-7142. doi:10.1021/acsomega.3c09065

BibTeX
@article{Fan2024,
  author = {Fan, Gaofeng and Zhang, Jinming and Yuan, Tianlin and Wang, Chang'an and Hou, Yujie and Gao, Xinyue and Xu, Jie and Che, Defu},
  title = {Experimental Study on the Erosion–Corrosion Characteristics of Desulfurization Slurry on Stainless Steel Pipe Materials},
  journal = {ACS Omega},
  year = {2024},
  volume = {9},
  number = {6},
  pages = {7132--7142},
  doi = {10.1021/acsomega.3c09065}
}
Kostenlos starten →