Selective Oxidation of Glycerol to Lactic Acid Catalyzed by CuO/Activated Carbon and Reaction Kinetics
ACS Omega · 05.03.2024 · 9 (9) · 10583-10591
DOI: 10.1021/acsomega.3c08845 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Omega, online erschienen am 22.02.2024. Verfasst von Shanqi Li und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical and Power Engineering, Shenyang University of Chemical Technology, Shenyang 110142, China. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Liaoning Revitalization Talents Program, Department of Education of Liaoning Province, Shenyang Young and Middle-aged Science and Technology Innovation Talent Support Program.
Abstract (Originalsprache)
Activated carbon-supported CuO catalysts were prepared by an ammonia evaporation method and applied to catalyze the selective oxidation of glycerol to lactic acid. The effects of CuO loadings on the structure and catalytic performance of the catalyst were investigated. Results showed that CuO could be dispersed uniformly on the surface of activated carbon, promoting the increase of the reaction rate and accelerating the glycerol conversion significantly. As CuO loadings increased, the rate of glycerol consumption and yield to lactic acid was increased. However, too high CuO loadings would destroy the original pore structure of activated carbon and aggravate the agglomeration of CuO, resulting in a decrease in the catalytic performance of the catalyst. The best catalytic performance was obtained over 10% CuO/AC when the reaction temperature was 190 °C and the reaction time was 5 h. At this point, the selectivity to lactic acid reached 92.61%. In addition, power-function type reaction kinetic equations were used to evaluate the effect of glycerol and NaOH concentrations and the reaction temperature on the oxidation of glycerol to lactic acid over 10% CuO/AC. The activation energy of the reaction is 134.39 kJ·mol–1, which is higher than that using single CuO as the catalyst. This indicates that CuO/AC is more temperature-sensitive than CuO and can probably achieve a higher lactic acid yield at high temperatures. At the same time, it is indicated that CuO supported on activated carbon can enhance the catalytic activity of CuO effectively.
Autor:innen und Institutionen
- College of Mechanical and Power Engineering, Shenyang University of Chemical Technology, Shenyang 110142, China.
- College of Chemical Engineering, Shenyang University of Chemical Technology, Shenyang 110142, China.
ORCID-Profile: Sansan Yu
Förderung
- Liaoning Revitalization Talents Program
- Department of Education of Liaoning Province
- Shenyang Young and Middle-aged Science and Technology Innovation Talent Support Program
- Applied Basic Research Programs of Liaoning Province
Zitieren
APA
Li, S., Li, S., Wang, Y., Tang, C., Qiu, L., & Yu, S. (2024). Selective Oxidation of Glycerol to Lactic Acid Catalyzed by CuO/Activated Carbon and Reaction Kinetics. ACS Omega, 9(9), 10583-10591. https://doi.org/10.1021/acsomega.3c08845
Vancouver
Li S, Li S, Wang Y, Tang C, Qiu L, Yu S. Selective Oxidation of Glycerol to Lactic Acid Catalyzed by CuO/Activated Carbon and Reaction Kinetics. ACS Omega. 2024;9(9):10583-10591. doi:10.1021/acsomega.3c08845
BibTeX
@article{Li2024,
author = {Li, Shanqi and Li, Shuangming and Wang, Yiwen and Tang, Cheng and Qiu, Leilei and Yu, Sansan},
title = {Selective Oxidation of Glycerol to Lactic Acid Catalyzed by CuO/Activated Carbon and Reaction Kinetics},
journal = {ACS Omega},
year = {2024},
volume = {9},
number = {9},
pages = {10583--10591},
doi = {10.1021/acsomega.3c08845}
}
EUVIMED