Significantly Tunable Foaming Behavior of Blowing Agent for the Polyethylene Foam Resin with a Unique Designed Blowing Agent System
ACS Omega · 06.02.2024 · 9 (5) · 5798-5808
DOI: 10.1021/acsomega.3c08734 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Omega, online erschienen am 29.01.2024. Verfasst von Xuelian Chen und 1 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Chemical Resource Engineering, Key Laboratory of Carbon Fiber and Functional Polymers, Ministry of Education, The College of …. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
The chemical blowing agent plays a crucial role in enhancing the performance of the polyethylene (PE) foaming resin during the rotational foaming process. Previously, the conventional blowing agent of the PE resin commonly used pure azodicarbonamide (AZ). It had the unavoidable drawbacks of releasing NH3 and exhibiting strong reactions during the rotational foaming process. Meantime, pure AZ had a relatively high decomposition temperature, resulting in a sharp foaming process. To address the above issues, this work developed a uniquely designed blowing agent system. In this study, a novel blowing agent for the PE resin was successfully synthesized by a one-pot method. This blowing agent consisted of an activator and AZ, which exhibited a lower decomposition temperature and a milder decomposition rate than AZ. The activator was constituted of small-sized ammonium dihydrogen phosphate on the AZ surface, which could be decomposed properly and deliver phosphoric acid and H2O during the foaming process. Then, AZ reacted with H2O under phosphoric acid catalysis. Also, this reaction generated CO2 emission while reducing the emission of NH3 through recombination with phosphoric acid. Moreover, phosphoric acid catalysis caused a decrease in the AZ decomposition temperature. Meantime, the thermal coupling appeared during the foaming process, which could further reduce the decomposition rate. Consequently, the small activator played a key role in regulating cell formation and diffusion. Compared to AZ, the novel blowing agent system significantly reduced the cell diameter of the PE foam resin and enhanced its flexural modulus by 50%. Furthermore, the novel blowing agent facilitated better demolding performance and improved the surface morphology of the PE foam product. This research provides significant foaming behavior regulation for the PE resin during industrial applications.
Autor:innen und Institutionen
- State Key Laboratory of Chemical Resource Engineering, Key Laboratory of Carbon Fiber and Functional Polymers, Ministry of Education, The College of Material Science and Engineering, Beijing University of Chemical Techn…
- Shenhua (Beijing) New Materials Technology CO. LTD, CHN Energy Group, Beijing 102211, China.
ORCID-Profile: Xuelian Chen, Qigu Huang
Zitieren
APA
Chen, X., & Huang, Q. (2024). Significantly Tunable Foaming Behavior of Blowing Agent for the Polyethylene Foam Resin with a Unique Designed Blowing Agent System. ACS Omega, 9(5), 5798-5808. https://doi.org/10.1021/acsomega.3c08734
Vancouver
Chen X, Huang Q. Significantly Tunable Foaming Behavior of Blowing Agent for the Polyethylene Foam Resin with a Unique Designed Blowing Agent System. ACS Omega. 2024;9(5):5798-5808. doi:10.1021/acsomega.3c08734
BibTeX
@article{Chen2024,
author = {Chen, Xuelian and Huang, Qigu},
title = {Significantly Tunable Foaming Behavior of Blowing Agent for the Polyethylene Foam Resin with a Unique Designed Blowing Agent System},
journal = {ACS Omega},
year = {2024},
volume = {9},
number = {5},
pages = {5798--5808},
doi = {10.1021/acsomega.3c08734}
}
EUVIMED