Impact of Eco-Friendly Drilling Additives on Foaming Properties for Sustainable Underbalanced Foam Drilling Applications
ACS Omega · 13.02.2024 · 9 (6) · 6719-6730
DOI: 10.1021/acsomega.3c07882 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Omega, online erschienen am 30.01.2024. Verfasst von Ahmed Gowida und 2 weiteren Autor:innen. Beteiligte Einrichtung: College of Petroleum Engineering and Geosciences, King Fahd University of Petroleum & Minerals, Dhahran, 31261, Saudi Arabia. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Underbalanced foam drilling stands out as a drilling technique acclaimed for its capacity to enhance safety and efficiency in operations. Utilizing foams as drilling fluids offers several benefits over traditional methods, including lower density, diminished formation damage, and augmented borehole stability. However, the persistent challenge of sustaining foam stability in demanding conditions, particularly amid elevated water salinity and alkaline environments, remains a critical issue. Current literature lacks comprehensive insights into foam stability under such specific circumstances, raising concerns about the practicality of numerous reported foaming agents in field applications. This study aims to fill this knowledge void to align with industry standards. With a heightened focus on sustainability due to mounting environmental considerations, the research explores the use of an eco-friendly surfactant, ammonium alcohol ether sulfate (AAES). Additionally, the investigation delves into the impact of environmentally friendly drilling additives-polyanionic cellulose (PAC), carboxymethyl cellulose (CMC), and starch-on the stability of bulk foam under mildly alkaline conditions. Employing a dynamic foam analyzer, diverse foam properties of AAES foams were assessed, encompassing stability, foamability, and bubble structure. The results demonstrated that the optimal concentrations of the tested additives, in the order of PAC > CMC > starch, significantly prolonged the half-life of the AAES foam bubbles. The introduction of PAC and CMC additives elevated the viscosity of AAES foaming solutions, enhancing the liquid retention within the foam structure. In contrast, starch addition exerted no influence on the solution viscosity and did not impede liquid drainage, although it did reduce bubble coalescence. Furthermore, the PAC- and CMC-based AAES foams manifested as considerably wetter foams with a rounded bubble structure, while the starch-based AAES foam exhibited a dry foam characterized by a distinct polyhedral bubble structure. These findings offer valuable insights into the potential application of the AAES surfactant in foam drilling, showcasing its efficacy in improving foam stability and contributing to the evolution of eco-friendly drilling practices.
Autor:innen und Institutionen
- College of Petroleum Engineering and Geosciences, King Fahd University of Petroleum & Minerals, Dhahran, 31261, Saudi Arabia.
ORCID-Profile: Salaheldin Elkatatny, Ahmed Farid Ibrahim
Zitieren
APA
Gowida, A., Elkatatny, S., & Ibrahim, A. F. (2024). Impact of Eco-Friendly Drilling Additives on Foaming Properties for Sustainable Underbalanced Foam Drilling Applications. ACS Omega, 9(6), 6719-6730. https://doi.org/10.1021/acsomega.3c07882
Vancouver
Gowida A, Elkatatny S, Ibrahim AF. Impact of Eco-Friendly Drilling Additives on Foaming Properties for Sustainable Underbalanced Foam Drilling Applications. ACS Omega. 2024;9(6):6719-6730. doi:10.1021/acsomega.3c07882
BibTeX
@article{Gowida2024,
author = {Gowida, Ahmed and Elkatatny, Salaheldin and Ibrahim, Ahmed Farid},
title = {Impact of Eco-Friendly Drilling Additives on Foaming Properties for Sustainable Underbalanced Foam Drilling Applications},
journal = {ACS Omega},
year = {2024},
volume = {9},
number = {6},
pages = {6719--6730},
doi = {10.1021/acsomega.3c07882}
}
EUVIMED