Study on the Performance of Ni–MoS 2 Catalysts with Different MoS 2 Structures for Dibenzothiophene Hydrodesulfurization
ACS Omega · 07.11.2023 · 8 (44) · 41182-41193
DOI: 10.1021/acsomega.3c04059 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Omega, online erschienen am 30.10.2023. Verfasst von Chuangchuang Yang und 5 weiteren Autor:innen. Beteiligte Einrichtung: SINOPEC Research Institute of Petroleum Processing Co., Ltd., 18 Xue Yuan Road, Beijing 100083, P. R. China. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 86 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Key Research and Development Program of China, China Petrochemical Corporation.
Abstract (Originalsprache)
Hydrodesulfurization (HDS) is an important process for the production of clean fuel oil, and the development of a new environmentally friendly, low-cost sulfided catalyst is key research in hydrogenation technology. Herein, commercial bulk MoS2 and NiCO3·2NiOH2·4H2O were first hydrothermally treated and then calcined in a H2 or N2 atmosphere to obtain Ni-MoS2 HDS catalysts with different structures. Mechanisms of hydrothermal treatment and calcination on Ni-MoS2 catalyst structures were investigated by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), electron paramagnetic resonance (EPR), and X-ray photoelectron spectroscopy (XPS). The catalytic performance of Ni-MoS2 catalysts was evaluated by the HDS reaction of dibenzothiophene (DBT) on a fixed bed reactor, and the structure-activity relationship between the structures of the Ni-MoS2 catalyst and the HDS of DBT was discussed. The results showed that the lateral size, the number of stacked layers, and the S/Mo atomic ratio of MoS2 in the catalyst decreased and then increased with the increase of the hydrothermal treatment temperature, reaching the minimum at the hydrothermal treatment temperature of 150 °C, i.e., the lateral size of MoS2 in the catalyst was 20-36 nm, the number of stacked layers of MoS2 was 5.4, and the S/Mo ratio in the catalyst was 1.80. In addition, the effects of different calcination temperatures and calcination atmospheres on the catalyst structures were investigated at the optimum hydrothermal treatment temperature. The Ni-Mo-S and NixSy ratios of the catalysts increased and then decreased with the increasing calcination temperature under a H2 atmosphere, reaching a maximum at a calcination temperature of 400 °C. Therefore, DBT exhibited the best HDS activity over the H-NiMo-150-400 catalyst, and the desulfurization rate of DBT reached 94.7% at a reaction temperature of 320 °C.
Autor:innen und Institutionen
- SINOPEC Research Institute of Petroleum Processing Co., Ltd., 18 Xue Yuan Road, Beijing 100083, P. R. China.
ORCID-Profile: Chuangchuang Yang, Zhiwei Liu
Förderung
- National Key Research and Development Program of China
- China Petrochemical Corporation
Zitieren
APA
Yang, C., Hu, A., Dai, Q., Yang, Q., Hou, R., & Liu, Z. (2023). Study on the Performance of Ni–MoS 2 Catalysts with Different MoS 2 Structures for Dibenzothiophene Hydrodesulfurization. ACS Omega, 8(44), 41182-41193. https://doi.org/10.1021/acsomega.3c04059
Vancouver
Yang C, Hu A, Dai Q, Yang Q, Hou R, Liu Z. Study on the Performance of Ni–MoS 2 Catalysts with Different MoS 2 Structures for Dibenzothiophene Hydrodesulfurization. ACS Omega. 2023;8(44):41182-41193. doi:10.1021/acsomega.3c04059
BibTeX
@article{Yang2023,
author = {Yang, Chuangchuang and Hu, Anpeng and Dai, Qiaoling and Yang, Qinghe and Hou, Ranran and Liu, Zhiwei},
title = {Study on the Performance of Ni–MoS 2 Catalysts with Different MoS 2 Structures for Dibenzothiophene Hydrodesulfurization},
journal = {ACS Omega},
year = {2023},
volume = {8},
number = {44},
pages = {41182--41193},
doi = {10.1021/acsomega.3c04059}
}
EUVIMED