EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Stepping toward Portable Optoelectronics with SnO 2 Quantum Dot-Based Electron Transport Layers

Muhammad Salman Kiani, Hryhorii P Parkhomenko iD, Mayuribala Mangrulkar, Sabina Aigarayeva, Assylan Akhanuly, Erik O Shalenov iD, Annie Ng iD, Askhat N Jumabekov iD

ACS Omega · 13.06.2023 · 8 (23) · 21212-21222

DOI: 10.1021/acsomega.3c02341 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 01.06.2023. Verfasst von Muhammad Salman Kiani und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics, School of Sciences and Humanities, Nazarbayev University, Astana 010000, Kazakhstan. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 74 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Ministry of Education and Science of the Republic of Kazakhstan, Nazarbayev University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With a power conversion efficiency (PCE) of more than 25%, perovskite solar cells (PSCs) have shown an immense potential application for solar energy conversion. Owing to lower manufacturing costs and facile processibility via printing techniques, PSCs can easily be scaled up to an industrial scale. The device performance of printed PSCs has been improving steadily with the development and optimization of the printing process for the device functional layers. Various kinds of SnO2 nanoparticle (NP) dispersion solutions including commercial ones are used to print the electron transport layer (ETL) of printed PSCs, and high processing temperatures are often required to obtain ETLs with optimum quality. This, however, limits the application of SnO2 ETLs in printed and flexible PSCs. In this work, the use of an alternative SnO2 dispersion solution based on SnO2 quantum dots (QDs) to fabricate ETLs of printed PSCs on flexible substrates is reported. A comparative analysis of the performance and properties of the obtained devices with the devices fabricated employing ETLs made with a commercial SnO2 NP dispersion solution is carried out. The ETLs made with SnO2 QDs are shown to improve the performance of devices by ∼11% on average compared to the ETLs made with SnO2 NPs. It is found that employing SnO2 QDs can reduce trap states in the perovskite layer and improve charge extraction in devices.

Autor:innen und Institutionen

  • Department of Physics, School of Sciences and Humanities, Nazarbayev University, Astana 010000, Kazakhstan.
  • Department of General Physics, Satbayev University, Almaty 050013, Kazakhstan.
  • Department of Electrical and Computer Engineering, School of Engineering and Digital Sciences, Nazarbayev University, Astana 010000, Kazakhstan.

ORCID-Profile: Hryhorii P Parkhomenko, Erik O Shalenov, Annie Ng, Askhat N Jumabekov

Förderung

  • Ministry of Education and Science of the Republic of Kazakhstan
  • Nazarbayev University

Zitieren

APA

Kiani, M. S., Parkhomenko, H. P., Mangrulkar, M., Aigarayeva, S., Akhanuly, A., Shalenov, E. O., Ng, A., & Jumabekov, A. N. (2023). Stepping toward Portable Optoelectronics with SnO 2 Quantum Dot-Based Electron Transport Layers. ACS Omega, 8(23), 21212-21222. https://doi.org/10.1021/acsomega.3c02341

Vancouver

Kiani MS, Parkhomenko HP, Mangrulkar M, Aigarayeva S, Akhanuly A, Shalenov EO, et al. Stepping toward Portable Optoelectronics with SnO 2 Quantum Dot-Based Electron Transport Layers. ACS Omega. 2023;8(23):21212-21222. doi:10.1021/acsomega.3c02341

BibTeX
@article{Kiani2023,
  author = {Kiani, Muhammad Salman and Parkhomenko, Hryhorii P and Mangrulkar, Mayuribala and Aigarayeva, Sabina and Akhanuly, Assylan and Shalenov, Erik O and Ng, Annie and Jumabekov, Askhat N},
  title = {Stepping toward Portable Optoelectronics with SnO 2 Quantum Dot-Based Electron Transport Layers},
  journal = {ACS Omega},
  year = {2023},
  volume = {8},
  number = {23},
  pages = {21212--21222},
  doi = {10.1021/acsomega.3c02341}
}
Kostenlos starten →